GAS EXAM PRACTICE QUESTIONS AND
ANSWERS
An employer is:
A. responsible for ensuring that safety instruction is provided to workers.
B. not responsible for ensuring that safety instruction is provided to workers
.C. responsible for ensuring that workers arrive safely on the job site.
D. responsible for providing all safety clothing to workers. - Answer-A. responsible for
ensuring that safety instruction is provided to workers.
Which of the following is true?
A. Workers do not have to wear heard hat off a construction site, even if instructed to do
so by the employer.
B. Workers must wear the protective clothing that the employer instructs them to wear
on the job site
.C. Workers do not have to be aware of the contents of the Occupational Health
andSafety Act
D. Unnecessary running or rough or boisterous conduct on job sites is not prohibited
bythe Occupational Health and Safety Act. - Answer-B. Workers must wear the
protective clothing that the employer instructs them to wear on the job site.
The Workers Compensation Board Act says that in all cases of injury or disease,
anemployer must:
A. make sure first aid is given within two hours
B. make sure there is a record of the first aid treatment or any advice given to
theworker.
C. complete and keep a form if more than first aid treatment or advice is needed.
D. notify worker's family immediately. - Answer-B. make sure there is a record of the
first aid treatment or any advice given to theworker.
According to the Workers Compensation Board Act which of the following statementsis
part of the worker's obligation in all cases of injury/disease?
A. Obtain first aid promptly.
B. Notify the employer of any injury within eight hours.
C. Notify the employer of the possible onset of a work-related disease/condition
withintwo working days.
D. Find a doctor or qualified practitioner who will give a second opinion concerning
theinjury. - Answer-B. Notify the employer of any injury within eight hours.
How many classes of fire extinguishers are listed?
A. three
B. four
C. five (Class A, B, C, D, K.)
D. six - Answer-C. five (Class A, B, C, D, K.)
, Which of the following are the key pieces of personal protective equipment?
A. hard hat, gloves, ear plugs, dust mask, safety glasses, work boots, face shields
B. ladders, hand tools, power tools
C. protective clothing, hand tools, face shields, hats
D. grounded extension cords, safety glasses, safety boots, hard hat - Answer-A. hard
hat, gloves, ear plugs, dust mask, safety glasses, work boots, face shields
What type of fastener would you use to join two electrical conductors?
A. electrical coupling
B. BX connector
C. marrette
D. electrical tape - Answer-Mrrette
The fastener used to connect a hose to a fan coil unit is:
A. a gear clamp
.B. copper bailing wire.
C. electrical tape.
D. a grappler bar. - Answer-A Gear Clamp
What is the purpose of a drill gauge?
A. To measure the diameter of a drill bit
.B. To measure the diameter of a drill.
C. To measure the length of a drill.
D. To measure the length of a drill bit. - Answer-Diameter of a Drill bit
The boiling point of water is:
A. 0 °F (-18°C)
B. 68 °F (20°C)
C. 200 °F ( 93°C )
D. 212 °F (100°C) - Answer-D. 212 °F (100°C)
To determine the indicated gas pressure on a water-filled "U" tube manometer.
A. read the amount of water column displaced on the pressure side.
B. read the amount of water column displaced on the atmospheric side
.C. read the amount of water column displaced on the pressure side and add it tothe
amount displaced on the atmospheric side.
D. read the amount of water column displaced on the pressure side and subtract itfrom
the amount displaced on the atmospheric side. - Answer-C. read the amount of water
column displaced on the pressure side and add it tothe amount displaced on the
atmospheric side.
Reading of 7.0" w.c equals:
A) 1/4 psig. (1.72kPal)
B) ½ psig. (3.45 kPa)
C) 3/4 psig.(5.17kPa)
ANSWERS
An employer is:
A. responsible for ensuring that safety instruction is provided to workers.
B. not responsible for ensuring that safety instruction is provided to workers
.C. responsible for ensuring that workers arrive safely on the job site.
D. responsible for providing all safety clothing to workers. - Answer-A. responsible for
ensuring that safety instruction is provided to workers.
Which of the following is true?
A. Workers do not have to wear heard hat off a construction site, even if instructed to do
so by the employer.
B. Workers must wear the protective clothing that the employer instructs them to wear
on the job site
.C. Workers do not have to be aware of the contents of the Occupational Health
andSafety Act
D. Unnecessary running or rough or boisterous conduct on job sites is not prohibited
bythe Occupational Health and Safety Act. - Answer-B. Workers must wear the
protective clothing that the employer instructs them to wear on the job site.
The Workers Compensation Board Act says that in all cases of injury or disease,
anemployer must:
A. make sure first aid is given within two hours
B. make sure there is a record of the first aid treatment or any advice given to
theworker.
C. complete and keep a form if more than first aid treatment or advice is needed.
D. notify worker's family immediately. - Answer-B. make sure there is a record of the
first aid treatment or any advice given to theworker.
According to the Workers Compensation Board Act which of the following statementsis
part of the worker's obligation in all cases of injury/disease?
A. Obtain first aid promptly.
B. Notify the employer of any injury within eight hours.
C. Notify the employer of the possible onset of a work-related disease/condition
withintwo working days.
D. Find a doctor or qualified practitioner who will give a second opinion concerning
theinjury. - Answer-B. Notify the employer of any injury within eight hours.
How many classes of fire extinguishers are listed?
A. three
B. four
C. five (Class A, B, C, D, K.)
D. six - Answer-C. five (Class A, B, C, D, K.)
, Which of the following are the key pieces of personal protective equipment?
A. hard hat, gloves, ear plugs, dust mask, safety glasses, work boots, face shields
B. ladders, hand tools, power tools
C. protective clothing, hand tools, face shields, hats
D. grounded extension cords, safety glasses, safety boots, hard hat - Answer-A. hard
hat, gloves, ear plugs, dust mask, safety glasses, work boots, face shields
What type of fastener would you use to join two electrical conductors?
A. electrical coupling
B. BX connector
C. marrette
D. electrical tape - Answer-Mrrette
The fastener used to connect a hose to a fan coil unit is:
A. a gear clamp
.B. copper bailing wire.
C. electrical tape.
D. a grappler bar. - Answer-A Gear Clamp
What is the purpose of a drill gauge?
A. To measure the diameter of a drill bit
.B. To measure the diameter of a drill.
C. To measure the length of a drill.
D. To measure the length of a drill bit. - Answer-Diameter of a Drill bit
The boiling point of water is:
A. 0 °F (-18°C)
B. 68 °F (20°C)
C. 200 °F ( 93°C )
D. 212 °F (100°C) - Answer-D. 212 °F (100°C)
To determine the indicated gas pressure on a water-filled "U" tube manometer.
A. read the amount of water column displaced on the pressure side.
B. read the amount of water column displaced on the atmospheric side
.C. read the amount of water column displaced on the pressure side and add it tothe
amount displaced on the atmospheric side.
D. read the amount of water column displaced on the pressure side and subtract itfrom
the amount displaced on the atmospheric side. - Answer-C. read the amount of water
column displaced on the pressure side and add it tothe amount displaced on the
atmospheric side.
Reading of 7.0" w.c equals:
A) 1/4 psig. (1.72kPal)
B) ½ psig. (3.45 kPa)
C) 3/4 psig.(5.17kPa)
