FULL NHIE Exam Practice 500+
Questions With Verified Solutions |
2025 LATEST UPDATED
1. Where you have found evidence of footing settlement, how can you predict
whether there will be further settlement?
(a) You can count the number of planes of movement.
(b) You can determine the type of foundation material.
(c) You cannot predict settlement from a single inspection.
(d) You can determine the depth of the footing. - ANSWER-You cannot predict
settlement from a single inspection
2. You typically identify a Freon leak
(a) As an oil stain
(b) As refrigerant coming out of the Freon line in the form of a cold mist.
(c) By the strong odor.
(d) By looking for evidence of ice along the refrigerant lines - ANSWER-As an oil
stain
3. Typical wood frame wall assemblies include all of the following components
EXCEPT.
(a) Studs
(b) Bridging
(c) Sheathing
(d) Siding - ANSWER-Bridging
4. All of the following are common approaches to improving chimney draft
EXCEPT
(a) Adding a draft inducer fan.
(b) Adding a rain cap.
(c) Extending the chimney upward.
(d) Resloping the cap. - ANSWER-Resloping the cap
5. All of the following statements are true of shrinkage cracks EXCEPT that
(a) Shrinkage cracks do not typically go into the footings.
(b) Shrinkage cracks do not necessarily have corresponding cracks
,elsewhere in the building.
(c) Vertical shear is associated with shrinkage cracks.
(d) Shrinkage cracks are common with poured concrete foundation
walls. - ANSWER-Vertical shear is associated with shrinkage cracks
6. Which of the following is NOT typically a component of a private water supply
system?
(a) Foot valve
(b) Pump
(c) Pressure regulator
(d) Pressure tank - ANSWER-Pressure regulator
7. Split-system, air-cooled, central air-conditioning systems have how many
fans?
(a) None
(b) One
(c) Two
(d) Four - ANSWER-Two
8. Insulated metal exterior doors with storm doors should be avoided because
they may
(a) Increase heat loss.
(b) Increase air leakage.
(c) Overheat.
(d) Have poor architectural appeal. - ANSWER-Overheat
9. You plug your circuit tester into an outlet that has a washing machine plugged
into it. Your tester shows that the outlet is properly wired and grounded. How
could you improve this inspection process?
(a) Use a voltage tester
(b) Use a circuit tester with a GFI test button
(c) Unplug the washing machine
(d) Turn the washing machine on before doing your test. - ANSWER-Unplug the
washing machine
10. Given a foundation wall that is cracked due to horizontal force
(a) You will not be able to determine whether the wall has also moved
inward.
,(b) If the wall has moved inward, the cracks would typically be wider on the inside
face.
(c) If the wall has moved inward, cracks will typically be wider on the outside
face.
(d) You should not be concerned unless the crack is at least ¼ in width. -
ANSWER-If the wall has moved inward, the cracks would typically be wider on
the inside face
11. On most steep roofs, exposed fasteners are
(a) Used for anchorage against wind.
(b) A sign of poor installation.
(c) A sign of good installation.
(d) Used to prevent ice dams. - ANSWER-A sign of poor installation
12. All of the following are slab-on-grade-construction techniques EXCEPT
(a) Monolithic slab.
(b) Floating slab.
(c) Inverted slab.
(d) Reinforced slab. - ANSWER-Inverted slab
13. Masonry chimneys should have a clearance from combustible framing
members of
(a) 1 inch.
(b) 2 inches.
(c) 4 inches.
(d) 12 inches. - ANSWER-2 inches
14. Efflorescence
(a) Is associated with water moving through masonry walls.
(b) Can only appear on the cold side of a wall.
(c) Only occurs in freezing climates.
(d) Is an organic growth. - ANSWER-Is associated with water moving through
masonry walls
15. On a conventional split-system air-conditioning system, the high-pressure
side is the portion of the refrigerant line from the
(a) Compressor to the expansion device.
(b) Metering device to the evaporator coil.
(c) Expansion device to the compressor.
, (d) Evaporator to the compressor. - ANSWER-Compressor to the expansion
device.
16. The presence of step flashing on an asphalt shingle roof can typically be
verified by
(a) Looking at the counter flashing.
(b) Knowing the age of the shingles on the roof.
(c) Knowing the number of layers of shingles on the roof.
(d) Lifting the shingles adjacent to the chimney or wall - ANSWER-Lifting the
shingles adjacent to the chimney or wall
17. Why are you more likely to see a house with a full basement in cold northern
climates than in warm southern climates?
(a) People in cold climates have snow removal equipment to store.
(b) Having to excavate below the frost line for the footings makes a basement
cost effective.
(c) Homes with basements need heat. In southern climates, it is a waste of
energy to heat the basement.
(d) There is a lot of bedrock in the southern climates " blasting would be required
to make a basement. - ANSWER-Having to excavate below the frost line for the
footings makes a basement cost effective.
18. All of the following are advantages to having clients attend inspections
EXCEPT
Questions With Verified Solutions |
2025 LATEST UPDATED
1. Where you have found evidence of footing settlement, how can you predict
whether there will be further settlement?
(a) You can count the number of planes of movement.
(b) You can determine the type of foundation material.
(c) You cannot predict settlement from a single inspection.
(d) You can determine the depth of the footing. - ANSWER-You cannot predict
settlement from a single inspection
2. You typically identify a Freon leak
(a) As an oil stain
(b) As refrigerant coming out of the Freon line in the form of a cold mist.
(c) By the strong odor.
(d) By looking for evidence of ice along the refrigerant lines - ANSWER-As an oil
stain
3. Typical wood frame wall assemblies include all of the following components
EXCEPT.
(a) Studs
(b) Bridging
(c) Sheathing
(d) Siding - ANSWER-Bridging
4. All of the following are common approaches to improving chimney draft
EXCEPT
(a) Adding a draft inducer fan.
(b) Adding a rain cap.
(c) Extending the chimney upward.
(d) Resloping the cap. - ANSWER-Resloping the cap
5. All of the following statements are true of shrinkage cracks EXCEPT that
(a) Shrinkage cracks do not typically go into the footings.
(b) Shrinkage cracks do not necessarily have corresponding cracks
,elsewhere in the building.
(c) Vertical shear is associated with shrinkage cracks.
(d) Shrinkage cracks are common with poured concrete foundation
walls. - ANSWER-Vertical shear is associated with shrinkage cracks
6. Which of the following is NOT typically a component of a private water supply
system?
(a) Foot valve
(b) Pump
(c) Pressure regulator
(d) Pressure tank - ANSWER-Pressure regulator
7. Split-system, air-cooled, central air-conditioning systems have how many
fans?
(a) None
(b) One
(c) Two
(d) Four - ANSWER-Two
8. Insulated metal exterior doors with storm doors should be avoided because
they may
(a) Increase heat loss.
(b) Increase air leakage.
(c) Overheat.
(d) Have poor architectural appeal. - ANSWER-Overheat
9. You plug your circuit tester into an outlet that has a washing machine plugged
into it. Your tester shows that the outlet is properly wired and grounded. How
could you improve this inspection process?
(a) Use a voltage tester
(b) Use a circuit tester with a GFI test button
(c) Unplug the washing machine
(d) Turn the washing machine on before doing your test. - ANSWER-Unplug the
washing machine
10. Given a foundation wall that is cracked due to horizontal force
(a) You will not be able to determine whether the wall has also moved
inward.
,(b) If the wall has moved inward, the cracks would typically be wider on the inside
face.
(c) If the wall has moved inward, cracks will typically be wider on the outside
face.
(d) You should not be concerned unless the crack is at least ¼ in width. -
ANSWER-If the wall has moved inward, the cracks would typically be wider on
the inside face
11. On most steep roofs, exposed fasteners are
(a) Used for anchorage against wind.
(b) A sign of poor installation.
(c) A sign of good installation.
(d) Used to prevent ice dams. - ANSWER-A sign of poor installation
12. All of the following are slab-on-grade-construction techniques EXCEPT
(a) Monolithic slab.
(b) Floating slab.
(c) Inverted slab.
(d) Reinforced slab. - ANSWER-Inverted slab
13. Masonry chimneys should have a clearance from combustible framing
members of
(a) 1 inch.
(b) 2 inches.
(c) 4 inches.
(d) 12 inches. - ANSWER-2 inches
14. Efflorescence
(a) Is associated with water moving through masonry walls.
(b) Can only appear on the cold side of a wall.
(c) Only occurs in freezing climates.
(d) Is an organic growth. - ANSWER-Is associated with water moving through
masonry walls
15. On a conventional split-system air-conditioning system, the high-pressure
side is the portion of the refrigerant line from the
(a) Compressor to the expansion device.
(b) Metering device to the evaporator coil.
(c) Expansion device to the compressor.
, (d) Evaporator to the compressor. - ANSWER-Compressor to the expansion
device.
16. The presence of step flashing on an asphalt shingle roof can typically be
verified by
(a) Looking at the counter flashing.
(b) Knowing the age of the shingles on the roof.
(c) Knowing the number of layers of shingles on the roof.
(d) Lifting the shingles adjacent to the chimney or wall - ANSWER-Lifting the
shingles adjacent to the chimney or wall
17. Why are you more likely to see a house with a full basement in cold northern
climates than in warm southern climates?
(a) People in cold climates have snow removal equipment to store.
(b) Having to excavate below the frost line for the footings makes a basement
cost effective.
(c) Homes with basements need heat. In southern climates, it is a waste of
energy to heat the basement.
(d) There is a lot of bedrock in the southern climates " blasting would be required
to make a basement. - ANSWER-Having to excavate below the frost line for the
footings makes a basement cost effective.
18. All of the following are advantages to having clients attend inspections
EXCEPT
