FDOT EARTHWORK LEVEL 1 EXAM NEWEST ACTUAL EXAM (3 VERSIONS) WITH COMPLETE QUESTIONS AND DETAILED VERIFIED ANSWERS GRADED A+ | 100% VERIFIED Answers

FDOT
EARTHWORK
LEVEL 1 EXAM
NEWEST
ACTUAL EXAM
(3 VERSIONS)
WITH
COMPLETE
QUESTIONS
AND DETAILED
VERIFIED

,ANSWERS
GRADED A+ |
100% VERIFIED
Answers

On limerock you use the what reading - ✔✔✔ Correct
Answer > Direct Dial

,If a dial reading exceeds 20% then you - ✔✔✔ Correct Answer > Re-
run with half the sample (10 or 13) and perform the test normally and double the dial reading by
2




If a dial reads 0 or extremely low - ✔✔✔ Correct
Answer
> Re-run with double the sample (40 or 52) and perform the test and divide the dial reading
by 2




If the speedy gets hot - ✔✔✔ Correct Answer > Let it
cool in shade


If the speedy is cold - ✔✔✔ Correct Answer >
>50F disregard and retest


Retest speedy if material comes out - ✔✔✔ Correct
Answer > in lumps after test


Reagent and the sample creates what gas - ✔✔✔ Correct Answer >
Acetylene gas and a mild alkali, calcium hydroxide (lime)

, All test data is recorded where - ✔✔✔ Correct Answer
>
Earthwork density report




QC density compare log in data is for - ✔✔✔ Correct
Answer > Initial start up and standard counts


Use the water table sign on - ✔✔✔ Correct Answer > The graph plots
using an upside down triangle with a ling under it and have it dated and signed




A failed test is plotted on a graph how - ✔✔✔ Correct
Answer > X with a circle around it


An Earthwork Density Report - ✔✔✔ Correct Answer >
is for density recordings


A summary of proctors sheet is for - ✔✔✔ Correct
Answer > different materials with lab proctors
(maximum density)