6 inches Ans✓✓-During demolition, technicians should cut beyond the visible
contaminated portion of porous structural materials by at least ____________
99.9 Ans✓✓-Disinfectants are tested to disinfect materials of more than _____%
of bloodborne pathogens and other microorganisms.
acceptable Ans✓✓-ATP test methods are user-friendly and allow for re-cleaning
and re-testing of surfaces until the results are ____________.
accessible Ans✓✓-Hard surfaces inside the vehicle can be cleaned and sanitized
to the extent they are ____________ or accessed by disassembly of vehicle
components.
ALWAYS Ans✓✓-The primary issue discussed in Universal Precautions Guidelines
is to ____________ consider any blood or body fluid to be contaminated
Assigned Protection Factor (APF) Ans✓✓-The effectiveness of respirators is
expressed by an ____________ ____________ ____________ (____)
barrier , warning Ans✓✓-Best practices for limiting access to work areas are
implementing ____________ tape or ____________ signs.
before Ans✓✓-Until contents have been cleaned, protective steps should be
taken to prevent cross-contamination. Contents should be protected or moved
offsite ____________ cleaning the structure.
, bubbles/foams Ans✓✓-Tech can apply a 3% to 5% solution of hydrogen peroxide
to verify all blood and tissues have been removed. Hydrogen Peroxide
____________ as it contacts fresh blood.
capture Ans✓✓-When washing contamination from exterior vehicle surfaces,
____________ the excess water runoff by using containment
change order Ans✓✓-When the work performed deviates from the original scope
of work, the company should document the changes in a written change notice or
____________
clean-up Ans✓✓-Once the ____________ work has been completed, any needed
rebuild or repairs can be made.
Cleanable. drywall, unfinished wood, concrete Ans✓✓-Semi-porous item are
usually ____________. Examples are blood splatter on __________,
____________, ____________
cleaning, affected components Ans✓✓-When the HVAC system is affected by
blood, bodily fluids or odors, the contamination should be removed by
____________ or ____________ ____________ removed.
communicate , problems Ans✓✓-Failure to ____________ in detail with
customers can be the source of later ____________.
complete Ans✓✓-The cleaning process is considered ____________ when all
visible contamination has been removed