CORRECT ANSWERS 100% ACCURATE
"What is the minimum force that a work positioning system anchorage must be able to withstand? -
CORRECT ANSWER=> Two times the arresting force of 3000lbs"
"What minimum force must a non-engineered anchor be able to withstand for fall protection use? -
CORRECT ANSWER=> 5,000 lbs"
"When working, how often should fall protection equipment be inspected ? - CORRECT ANSWER=> Daily
before each use"
"According to the applicable industry standard, what is the minimum height from a lower surface or
ground where fall protection must be used? - CORRECT ANSWER=> Six feet"
"How many pounds force is one kilo Newton(kN) - CORRECT ANSWER=> 225"
"What are the four most common types of towers used to support telecommunications antennas? -
CORRECT ANSWER=> Guyed towers, self-support towers, monopoles, and non- standard"
"What identifies a self-support tower? - CORRECT ANSWER=> Horizontal member"
"What is not a component on a guyed tower? - CORRECT ANSWER=> Gin pole"
"What is the purpose of a turnbuckle when working with guy wires? - CORRECT ANSWER=> Adjusts the
tension"
"Which government organization regulates tower lighting ? - CORRECT ANSWER=> FAA"
"When completing tower demolition, what must you have in place before you start the job? - CORRECT
ANSWER=> Demolition permit"
"When completing the visual inspection of a foundation, what is one of the key items to look for? -
CORRECT ANSWER=> Cracks"
"What term identifies a monopole component? - CORRECT ANSWER=> Base flange"
"According to the manufacturers specifications, what is the minimum number of ground kits installed on
a single Run? - CORRECT ANSWER=> Three"
"What type of antenna is used to transmit signal from tower to tower? - CORRECT ANSWER=>
Microwave dish"
, "Where should a coax ground be placed vertically in relation to the hoisting grip? - CORRECT ANSWER=>
Above it"
"When using tape and butyl to weatherproof a ground kit, what is a critical step in this process ? -
CORRECT ANSWER=> Cut the tape when terminator"
"When inspecting a wire rope diameter the actual diameter is slightly larger then the specific diameter ?
- CORRECT ANSWER=> True"
"What does FS stand for in rigging applications ? - CORRECT ANSWER=> Factor or safety"
"The outer sheath of synthetic endless sling is part of the slings strength? - CORRECT ANSWER=> False"
"What does BS stand for in rigging applications ? - CORRECT ANSWER=> Breaking Strength"
"If a synthetic rope has a breaking strength of 6,600 lbs and a bowline knot is tied to make a lifting
eye ,what is the maximum gross load that can be lifted ? - CORRECT ANSWER=> 660lbs"
"If a synthetic rope has a breaking strength of 7,600 lbs, what is the maximum gross load that can be
lifted ? - CORRECT ANSWER=> 760lbs"
"What is the factor of safety, specified for synthetic rope ? - CORRECT ANSWER=> 10:1"
"What is the factor of safety specified for blocks ? - CORRECT ANSWER=> 4:1"
"What does WLL stand for in rigging applications ? - CORRECT ANSWER=> Working Load Limit"
"What is not a component of gross load? - CORRECT ANSWER=> Tag person"
"What is the factor of safety specified for rigging equipment ? - CORRECT ANSWER=> 5:1"
"Exposure to non-ionizing radiation does what to the human body? - CORRECT ANSWER=> Does not
permanently change cells"
"Some symptoms from overexposure to RF include? - CORRECT ANSWER=> Headache, nausea, poor
mental capacity"
"Due to the resonance frequency and the high power of broadcast antennas, overexposure is almost
always a problem? - CORRECT ANSWER=> True"
"A red RF sign Indicates what? - CORRECT ANSWER=> RF fields exceed limits for workers"