Basic Vehicle Technologies 2: Safety Exam Questions and Answers

Basic Vehicle Technologies 2: Safety Intelligent Back-Up Intervention (I-BI) can detect vehicles approaching from either side and _______ directly behind the vehicle when backing up. - Answer-Large stationary objects How does Blind Spot Warning (BSW) help to improve safety? - Answer-Illuminates an indicator light near the A-pillar or outside mirror to warn the driver Alerts driver if vehicle is detected in the blind spot area What are the benefits of Intelligent Around View Monitor (I-AVM) - Answer-It can alert the driver to moving objects nearby It can provide greater viability when parking Which two features are part of the Safety Shield 360 suite of six features that help protect you at the front of the vehicle? - Answer-Automatic Emergency Braking with Pedestrian Detection High Beam Assist Where can New Car Assessment Program (NCAP) test results be found? - A Nissan's radar-based Blind Spot Warning (BSW) System has a detect zone? - Answer-10 feet back from the outside mirrors and 10 feet to the sides What do front-impact supplemental air bags with dual-threshold deployment do? - Answer-Front air bags inflate differently for belted and unbelted occupants What does Automatic Emergency Braking with Pedestrian Detection use to identify pedestrians? - Answer-A forward facing camera Image recognition software Which organization conducts the New Car Assessment Program (NCAP)? - Answer-National Highway Traffic Safety Administration (NHTSA) When used in conjunction ______, side-impact supplemental air bags help reduce the driver's and front-passenger's risk of injury during certain side-impact collisions. - Answer-Seat belts How does Lane Departure Warning (LDW) determine if the vehicle is drifting from the designated lane? - Answer-Camera scans the lane markers on the road At what speed will High Beam Assist activate the high beams when no other moving vehicles are detected? - Answer-34 mph Which of the following statements is true of air bags with dual-stage inflation? - Answer-Timing of the 2nd-stage inflator varies based on crash severity How do driver and front-passenger seat-mounted side-impact supplemental air bags improve safety? - Answer-Help slow the lateral deceleration of a front-seat occupant during side impact Typically, seatback-mounted side-impact air bags are designed to help protect the ________. - Answer-Chest Hip How does Lane Departure Warning (LDW) alert the driver to unintended movement of the vehicle out of a designated lane? - Answer-A warning light and chime What conditions my cause High Beam Assist to NOT switch settings automatically? - Answer-Bad weather When a sign or container being towed by a vehicle ahead reflects intense light Roads with many hills or curves The headlights of an oncoming vehicle are off or out of position Which two features are part of the Safety Shield 360 suite of six features that help protect you when backing up? - Answer-- Rear Automatic Braking - Rear Cross Traffic Alerts What is the benefit of air bags with dual-stage inflation? - Answer-Designed to inflate with less force in less severe impacts and more force in more severe impacts Which two features are part of the Safety Shield 360 suite of six features that help protect you at the front of the vehicle? - Answer-Automatic Emergency Braking with Pedestrian Detection High Beam Assist How does Intelligent Forward Collision Warning (I-FCW) differ from the Forward Collision Warning system? - Answer-I-FCW can monitor the vehicle traveling in front of the vehicle ahead When Intelligent Blind Spot Intervention (I-BSI) detects a vehicle in the blind spot area and the driver's vehicle is getting close to the lane markings on the same side, what actions can it take? - Answer-An audible warning will sound VDC applies brakes to the opposite side of the vehicle to help bring the vehicle back toward the center of the lane A warning will flash near the A-pillar