AWS-CWI Part B Test 4 Questions With
Correct Answers
What is the preferred term for "internal misallignment" in pipeline applications? High-low
If a J-groove weld was welded to another J-groove weld as a single sided joint, what type of joint
design is this? A single sided U-groove joint design.
Visual inspection for cracks in welds and base metal and other discontinuities aided by
_________________, ___________________, and _________________ as may be found
helpful or necessary. Light, Magnifier, Mirror
What is the minimum size fillet weld that can be acceptable when the welding symbol specifies
the weld to be 1/2" in size and 3" long? Use Structural Criteria: 3/8"
What is not common visual inspection criteria for both statically loaded non-tubular connections
and cyclically loaded non-tubular connections? All craters in continuous fillet welds shall
be filled to provided the specified weld size.
All weld repairs of depth exceeding 1 inch or 20% of the sections thickness, whichever is lesser,
shall be inspected by: Radiography and
Dye Penetrant testing or
Magnetic Particle testing
, Base metal should be free of arc strikes. True or False False
What is the abbreviation for procedure qualification record? PQR
According to Clause 4 (Pressure Piping), surfaces for welding shall be clean and free from:
Rust
Oil
Paint
To qualify a WPS procedure for welding in both overhead and vertical positions, the PQR test
should be tested in what positions? A PQR run in any position qualifies the WPS in all
positions.
True or False: Adjacent beads should neither be started nor terminated at the same location under
workmanship requirements for pipeline. True
True or False: The representative requirements in the Book of Specifications are intended to be
applied to actual industrial facilities, equipment or structures False
A welder qualified on pipe less than 1: in outside diameter is also qualified to
weld________________? Size welded and all fillet welds
What is a departure of a quality characteristic from its intended condition? Imperfection
Correct Answers
What is the preferred term for "internal misallignment" in pipeline applications? High-low
If a J-groove weld was welded to another J-groove weld as a single sided joint, what type of joint
design is this? A single sided U-groove joint design.
Visual inspection for cracks in welds and base metal and other discontinuities aided by
_________________, ___________________, and _________________ as may be found
helpful or necessary. Light, Magnifier, Mirror
What is the minimum size fillet weld that can be acceptable when the welding symbol specifies
the weld to be 1/2" in size and 3" long? Use Structural Criteria: 3/8"
What is not common visual inspection criteria for both statically loaded non-tubular connections
and cyclically loaded non-tubular connections? All craters in continuous fillet welds shall
be filled to provided the specified weld size.
All weld repairs of depth exceeding 1 inch or 20% of the sections thickness, whichever is lesser,
shall be inspected by: Radiography and
Dye Penetrant testing or
Magnetic Particle testing
, Base metal should be free of arc strikes. True or False False
What is the abbreviation for procedure qualification record? PQR
According to Clause 4 (Pressure Piping), surfaces for welding shall be clean and free from:
Rust
Oil
Paint
To qualify a WPS procedure for welding in both overhead and vertical positions, the PQR test
should be tested in what positions? A PQR run in any position qualifies the WPS in all
positions.
True or False: Adjacent beads should neither be started nor terminated at the same location under
workmanship requirements for pipeline. True
True or False: The representative requirements in the Book of Specifications are intended to be
applied to actual industrial facilities, equipment or structures False
A welder qualified on pipe less than 1: in outside diameter is also qualified to
weld________________? Size welded and all fillet welds
What is a departure of a quality characteristic from its intended condition? Imperfection
