NEW 2025 ASE A-1- Section B WITH CORRECT AND VERIFIED QUESTIONA AND ANSWERS

NEW 2025 ASE A-1-
Section B WITH
CORRECT AND VERIFIED
QUESTIONA AND
ANSWERS/

, ✓ a cylinder head should only be removed once an engine is - CORRECT ANSWER-
cold

✓ removing a warm cylinder head may allow it to - CORRECT ANSWER-warp,
especially if it is aluminum

✓ OHV and OHC stand for - CORRECT ANSWER-overhead valve
✓ overhead cam(shaft)

✓ cylinder head removal on an OHV engine requires that the _______________ be
__________ - CORRECT ANSWER-rocker arm cover, rocker arms, and pushrods
be removed

✓ when removing a stamped sheet metal rocker cover, be careful to avoid -
CORRECT ANSWER-damaging the cover by prying against one of its edges.

✓ covers sealed to the cylinder head by RTV sealant can loosened by ___ ;

✓ the object is to get the cover to ... - CORRECT ANSWER-striking a strong area at
the end of the cover with a rubber mallet;

✓ slide slightly on the head to break the seal

✓ on engines with stud-mounted rocker arms, loosen - CORRECT ANSWER-the
lash adjusting nuts enough to turn the rockers sideways and remove the
pushrods

✓ on engines with tube-mounted rocker arms, loosen each - CORRECT ANSWER-
tube-mounting bolt one turn at a time until the pushrods are loose.