CWI Examination-001 Pop Test Modules
1&2- Part A Fundamentals Revision 7
There are how many levels of AWS certifications? ANSWERS Three
Who is responsible for determining if a person has all of the qualifications?
ANSWERS Person's employer
A Certified Welding Inspector's responsibility is? ANSWERS Witnessing testing of
welder test assemblies
Interpreting drawings and other documents
Verifying that the Welding Procedure are as specified and qualified
A Senior Certified Welding Inspector shall have no fewer than _______ years'
experience in an occupation that has a direct relationship to welded assemblies
fabricated to national or international standards. ANSWERS Fifteen
If a candidate that is testing for his/her CWI certification and does not have but a
seventh grade education, they must have a minimum of ______ years' work experience
un welding function. ANSWERS Twelve
The maximum amount of time an Engineering/Technical or physical science degree can
count against the required amount of time needed for experience is _________ years.
ANSWERS Two
All senior certified welding inspectors must successfully complete the SCWI
examination with a minimum of _______% correct. ANSWERS 72
It is ok for a SCWI, CWI or CAWI to issue a statement on weld inspection matters
connected with public policy which were inspired or paid for by an interested party as
long as he/she identifies the interested party, speaker and discloses any possible
financial interest. ANSWERS True
It is ok for a SCWI, CWI or CAWI to accept a hunting or fishing trip from any party or
parties dealing with client or employer in connection with his work, as long as it has no
influence over his decision making process. ANSWERS False
The only way an Inspector can re-new his/her certification from the date of their initial
certification is by taking the test over the practical portion of the examination.
ANSWERS False
, The standard that covers Safety in Welding, Cutting and Allied Process is
ANSWERS ANSI/ASC Z49.1
The welding inspector is a responsible person involved in the determination of weld
quality in accordance with________. ANSWERS Applicable codes and or
specification
The welding Inspector must be able to prove far vision acuity on a _______ chart at 12
feet and complete a color prescription test. ANSWERS J1
J2
Snellen
NON OF THE ABOVE
KASHMIR stand for _________. ANSWERS Knowledge, Attitude, Skills, and
Habits
A welding Inspector must be able to communicate with which of the following types of
people? ANSWERS Welders, Engineers, Shop or Field Superintendents
The typical accepted standard for guidance in the certification of Non-Destructive
Personnel is _______. ANSWERS ASNT-SNT-TC-1A
AWS D1.! Covers ANSWERS Structural Welding Code
The OSHA standard that covers Hazard Communication is ____________.
ANSWERS OSHA 29 CFR 1920.1200
TLV stands for _______ ANSWERS Threshold Limit Value
The fumes and gases generated by welding are generally not considered to be harmful,
if you have MSDS sheet on them. ANSWERS False
Oxygen enriched atmosphere pose great danger to occupants of confined areas when
the oxygen level is above________. ANSWERS 25%
File gas cylinder valves should be opened _______________. ANSWERS Just
enough to provide adequate gas flow
A welding circuit must be de-energized when the electrode torch or gun is being
changed or adjusted. ANSWERS True
When performing GTAW using between 60 Arc Current Amps and 160 Amps, the
Shade of the lens should be ________. ANSWERS #8 to #12
ANSI/Z87.1 covers ANSWERS Practice for Occupational and Educational Eye
and ace Protection
1&2- Part A Fundamentals Revision 7
There are how many levels of AWS certifications? ANSWERS Three
Who is responsible for determining if a person has all of the qualifications?
ANSWERS Person's employer
A Certified Welding Inspector's responsibility is? ANSWERS Witnessing testing of
welder test assemblies
Interpreting drawings and other documents
Verifying that the Welding Procedure are as specified and qualified
A Senior Certified Welding Inspector shall have no fewer than _______ years'
experience in an occupation that has a direct relationship to welded assemblies
fabricated to national or international standards. ANSWERS Fifteen
If a candidate that is testing for his/her CWI certification and does not have but a
seventh grade education, they must have a minimum of ______ years' work experience
un welding function. ANSWERS Twelve
The maximum amount of time an Engineering/Technical or physical science degree can
count against the required amount of time needed for experience is _________ years.
ANSWERS Two
All senior certified welding inspectors must successfully complete the SCWI
examination with a minimum of _______% correct. ANSWERS 72
It is ok for a SCWI, CWI or CAWI to issue a statement on weld inspection matters
connected with public policy which were inspired or paid for by an interested party as
long as he/she identifies the interested party, speaker and discloses any possible
financial interest. ANSWERS True
It is ok for a SCWI, CWI or CAWI to accept a hunting or fishing trip from any party or
parties dealing with client or employer in connection with his work, as long as it has no
influence over his decision making process. ANSWERS False
The only way an Inspector can re-new his/her certification from the date of their initial
certification is by taking the test over the practical portion of the examination.
ANSWERS False
, The standard that covers Safety in Welding, Cutting and Allied Process is
ANSWERS ANSI/ASC Z49.1
The welding inspector is a responsible person involved in the determination of weld
quality in accordance with________. ANSWERS Applicable codes and or
specification
The welding Inspector must be able to prove far vision acuity on a _______ chart at 12
feet and complete a color prescription test. ANSWERS J1
J2
Snellen
NON OF THE ABOVE
KASHMIR stand for _________. ANSWERS Knowledge, Attitude, Skills, and
Habits
A welding Inspector must be able to communicate with which of the following types of
people? ANSWERS Welders, Engineers, Shop or Field Superintendents
The typical accepted standard for guidance in the certification of Non-Destructive
Personnel is _______. ANSWERS ASNT-SNT-TC-1A
AWS D1.! Covers ANSWERS Structural Welding Code
The OSHA standard that covers Hazard Communication is ____________.
ANSWERS OSHA 29 CFR 1920.1200
TLV stands for _______ ANSWERS Threshold Limit Value
The fumes and gases generated by welding are generally not considered to be harmful,
if you have MSDS sheet on them. ANSWERS False
Oxygen enriched atmosphere pose great danger to occupants of confined areas when
the oxygen level is above________. ANSWERS 25%
File gas cylinder valves should be opened _______________. ANSWERS Just
enough to provide adequate gas flow
A welding circuit must be de-energized when the electrode torch or gun is being
changed or adjusted. ANSWERS True
When performing GTAW using between 60 Arc Current Amps and 160 Amps, the
Shade of the lens should be ________. ANSWERS #8 to #12
ANSI/Z87.1 covers ANSWERS Practice for Occupational and Educational Eye
and ace Protection
