NCCER Module 9 Latest Update 2025 Questions Fully Solved
before attempting to lift any material; - Answers look for any protruding nails, wires, or sharp edges
before attempting to lower an overhead load, - Answers size up the load
What is the proper procedure to lift objects? - Answers Lift with your legs, keep your back straight, and
keep your head up
When stacking bags of materials that are the same with step back, and Cross key, the bags until... -
Answers The stock reaches 10 feet
Never stack or store materials_______. - Answers on scaffolds
The knot shown on question six is a... - Answers Clove Hitch
One common way to tie a clove hitch is to use two ____. - Answers half hitches
when moving a material cart on an incline or decline surface, be sure the? - Answers load does not
exceed the labeled weight capacity
To transport a bottle of compressed, gas use a - Answers Cylinder cart
What device may have a rotating table surface, and or spikes on the table surface for a better grip? -
Answers Roller skid
To work with motorized material-handling equipment, a worker must be - Answers trained, certified,
and authorized
how is the fall zone for forklift oeeratoration best defined. - Answers Any area into which the lift and
materials could potentially fall
To prevent a tip over when driving a rough terrain forklift, keep the load - Answers low
When using hand signals always - Answers maintain eye contact with the operator
The forklift hand signal for "dog everything"means___________. - Answers to pause
Loose gloves, make it caught on moving objects, and they reduce - Answers grip strength
When lifting a load, keep the load - Answers Close to your body
The area into which a load is being lowered, should be treated as a - Answers fall zone
how many inches should start bricks be tapered for every foot about 4 feet in the stack? - Answers 2
inches
before attempting to lift any material; - Answers look for any protruding nails, wires, or sharp edges
before attempting to lower an overhead load, - Answers size up the load
What is the proper procedure to lift objects? - Answers Lift with your legs, keep your back straight, and
keep your head up
When stacking bags of materials that are the same with step back, and Cross key, the bags until... -
Answers The stock reaches 10 feet
Never stack or store materials_______. - Answers on scaffolds
The knot shown on question six is a... - Answers Clove Hitch
One common way to tie a clove hitch is to use two ____. - Answers half hitches
when moving a material cart on an incline or decline surface, be sure the? - Answers load does not
exceed the labeled weight capacity
To transport a bottle of compressed, gas use a - Answers Cylinder cart
What device may have a rotating table surface, and or spikes on the table surface for a better grip? -
Answers Roller skid
To work with motorized material-handling equipment, a worker must be - Answers trained, certified,
and authorized
how is the fall zone for forklift oeeratoration best defined. - Answers Any area into which the lift and
materials could potentially fall
To prevent a tip over when driving a rough terrain forklift, keep the load - Answers low
When using hand signals always - Answers maintain eye contact with the operator
The forklift hand signal for "dog everything"means___________. - Answers to pause
Loose gloves, make it caught on moving objects, and they reduce - Answers grip strength
When lifting a load, keep the load - Answers Close to your body
The area into which a load is being lowered, should be treated as a - Answers fall zone
how many inches should start bricks be tapered for every foot about 4 feet in the stack? - Answers 2
inches
