Automotive Exam ACTUAL Exam
Questions and CORRECT Answers
a safety stand is also called a - CORRECT ANSWER - jack stand
a creeper should be stored - CORRECT ANSWER - vertically
the SAE standard for hoist location is - CORRECT ANSWER - JRP-2184
Tall safety stands would be used to - CORRECT ANSWER - Help support the vehicle
when a major component is removed from the vehicle
Commonly damaged areas of a vehicle during hoisting include ______. - CORRECT
ANSWER - All of these
Pad extensions may be needed when hoisting what type of vehicle? - CORRECT
ANSWER - Either B or C
technician A says that a hoist can be stopped at any level as long as the safety latch engages.
Technician B says that the vehicle should be hoisted to the top of the hoist travel for safety.
which technician is correct? - CORRECT ANSWER - Technician A
Before lowering the vehicle, what should the technician do? - CORRECT ANSWER - All
of these
Technician A says that a creeper should be stored vertically. Technician B says that a creeper
should be stored 9n its casters. Which technician is correct - CORRECT ANSWER -
Technician A only
, when checking stability, how high should the vehicle be raised - CORRECT ANSWER -
about 1 foot (30cm)
most floor jacks have _____ casters - CORRECT ANSWER - Four
Floor jacks are designed to support a load - CORRECT ANSWER - False
Which symbol is used to indicate safe lifting points - CORRECT ANSWER - Triangle
when removing heavy objects that may change the centre of gravity of a vehicle - CORRECT
ANSWER - Both A and B
Commonly damaged areas of vehicles being hoisted include - CORRECT ANSWER -
Both A and B
Technician A says to never look away from a vehicle being hoisted. Technician B saus that the
vehicle must be raised off the mechanical locks before lowering. Which technician is correct? -
CORRECT ANSWER - Both technicians A and B
which of these is least likely to be us3d by professional shops - CORRECT ANSWER -
drive-up ramps
Technician A Says that drive up ramp may shift and "kick out" allowing the vehicle to drop
unexpectedly. Technician B says that the wheels should always be chocked when using ramps.
Which technician is correct - CORRECT ANSWER - Both Technicians A and B
Proper lifting usually requires the vehicle to be ______ - CORRECT ANSWER - Both A
and B
Tall pad extensions are used ____ - CORRECT ANSWER - To engage the frame of trucks
Questions and CORRECT Answers
a safety stand is also called a - CORRECT ANSWER - jack stand
a creeper should be stored - CORRECT ANSWER - vertically
the SAE standard for hoist location is - CORRECT ANSWER - JRP-2184
Tall safety stands would be used to - CORRECT ANSWER - Help support the vehicle
when a major component is removed from the vehicle
Commonly damaged areas of a vehicle during hoisting include ______. - CORRECT
ANSWER - All of these
Pad extensions may be needed when hoisting what type of vehicle? - CORRECT
ANSWER - Either B or C
technician A says that a hoist can be stopped at any level as long as the safety latch engages.
Technician B says that the vehicle should be hoisted to the top of the hoist travel for safety.
which technician is correct? - CORRECT ANSWER - Technician A
Before lowering the vehicle, what should the technician do? - CORRECT ANSWER - All
of these
Technician A says that a creeper should be stored vertically. Technician B says that a creeper
should be stored 9n its casters. Which technician is correct - CORRECT ANSWER -
Technician A only
, when checking stability, how high should the vehicle be raised - CORRECT ANSWER -
about 1 foot (30cm)
most floor jacks have _____ casters - CORRECT ANSWER - Four
Floor jacks are designed to support a load - CORRECT ANSWER - False
Which symbol is used to indicate safe lifting points - CORRECT ANSWER - Triangle
when removing heavy objects that may change the centre of gravity of a vehicle - CORRECT
ANSWER - Both A and B
Commonly damaged areas of vehicles being hoisted include - CORRECT ANSWER -
Both A and B
Technician A says to never look away from a vehicle being hoisted. Technician B saus that the
vehicle must be raised off the mechanical locks before lowering. Which technician is correct? -
CORRECT ANSWER - Both technicians A and B
which of these is least likely to be us3d by professional shops - CORRECT ANSWER -
drive-up ramps
Technician A Says that drive up ramp may shift and "kick out" allowing the vehicle to drop
unexpectedly. Technician B says that the wheels should always be chocked when using ramps.
Which technician is correct - CORRECT ANSWER - Both Technicians A and B
Proper lifting usually requires the vehicle to be ______ - CORRECT ANSWER - Both A
and B
Tall pad extensions are used ____ - CORRECT ANSWER - To engage the frame of trucks
