AUTOCAD CERTIFICATION NEW EXAM WITH
COMPLETE SOLUTIONS 100% VERIFIED!!
Grip mode - ANSWER it allows you to edit the size, position, and rotation of a selected
object
Where do you go to change snap and grid settings? - ANSWER 1. Bottom told bar right
click on icon for Snap Mode, click on settings
2. In drafting settings under snap and grid
How to use the Window Polygon command - ANSWER 1. In command line enter
SELECT and press enter
2. Type WP and press enter
3. click in the area you want
What is the correct method of selecting the object to stretch one of its legs? - ANSWER
Use a crossing window
Which key command allows you to cycle through snaps? - ANSWER Tab
When rotating an object in the object rotates around - ANSWER the base point
Creating an object using inferred constrains automatically applies coincident
constraints for all of the following object snaps except for - ANSWER Midpoint
Which allows you to view a drawing in 3D? - ANSWER Use the view cube and Hold shift
+ middle mouse button
,How to add a note - ANSWER 1. go to annotation drop down
2. click on big A
3. enter note
Which of the following volume calculations method is limited to material lists that have
only two surfaces and can't be used for material list that contain corridor shapes? -
ANSWER The composite method
Which is not a valid plot area property? - ANSWER full
window - ANSWER plots any portion of a drawing that you specify
display - ANSWER plots what is currently displayed on screen
extents - ANSWER plots everything
layout - ANSWER plots everything within paper boundaries
How to change the plot of a drawing in the plotting settings - ANSWER 1. go to big A
2. print and then plot
How to joint to lines together to create one object - ANSWER 1.Select the lines first
2.go to modify
3.click on join
which of the following can Not have a break applied to them - ANSWER blocks
what does not benefit of using layouts - ANSWER layouts constraints
, Baseline - ANSWER allows you to create multiple dimensions that are measured from a
set point
aligned - ANSWER lets you align dimensions that have unknown angles
radial - ANSWER lets you add a dimension to any circle or arc
continue - ANSWER lets you add an aligned string of dimensions
What would you do to improve your computers performance while you work on
individual layers in your drawing? - ANSWER Freeze layers because it hides the layers
ByLayer - ANSWER objects are created with the linetype that is assigned to the
current layer
ByBlock - ANSWER objects are created using the continuous lenitive until the line
objects are combined into a block definition
Explicitly set - ANSWER objects are created with that linetype regardless of the
current layer
Continuous - ANSWER displays an unbroken line
associative - ANSWER this hatch or fill is updated when you modify its boundary
objects
draw order - ANSWER allows you to place a hatch or fill behind or in front of objects or
hatch boundaries
COMPLETE SOLUTIONS 100% VERIFIED!!
Grip mode - ANSWER it allows you to edit the size, position, and rotation of a selected
object
Where do you go to change snap and grid settings? - ANSWER 1. Bottom told bar right
click on icon for Snap Mode, click on settings
2. In drafting settings under snap and grid
How to use the Window Polygon command - ANSWER 1. In command line enter
SELECT and press enter
2. Type WP and press enter
3. click in the area you want
What is the correct method of selecting the object to stretch one of its legs? - ANSWER
Use a crossing window
Which key command allows you to cycle through snaps? - ANSWER Tab
When rotating an object in the object rotates around - ANSWER the base point
Creating an object using inferred constrains automatically applies coincident
constraints for all of the following object snaps except for - ANSWER Midpoint
Which allows you to view a drawing in 3D? - ANSWER Use the view cube and Hold shift
+ middle mouse button
,How to add a note - ANSWER 1. go to annotation drop down
2. click on big A
3. enter note
Which of the following volume calculations method is limited to material lists that have
only two surfaces and can't be used for material list that contain corridor shapes? -
ANSWER The composite method
Which is not a valid plot area property? - ANSWER full
window - ANSWER plots any portion of a drawing that you specify
display - ANSWER plots what is currently displayed on screen
extents - ANSWER plots everything
layout - ANSWER plots everything within paper boundaries
How to change the plot of a drawing in the plotting settings - ANSWER 1. go to big A
2. print and then plot
How to joint to lines together to create one object - ANSWER 1.Select the lines first
2.go to modify
3.click on join
which of the following can Not have a break applied to them - ANSWER blocks
what does not benefit of using layouts - ANSWER layouts constraints
, Baseline - ANSWER allows you to create multiple dimensions that are measured from a
set point
aligned - ANSWER lets you align dimensions that have unknown angles
radial - ANSWER lets you add a dimension to any circle or arc
continue - ANSWER lets you add an aligned string of dimensions
What would you do to improve your computers performance while you work on
individual layers in your drawing? - ANSWER Freeze layers because it hides the layers
ByLayer - ANSWER objects are created with the linetype that is assigned to the
current layer
ByBlock - ANSWER objects are created using the continuous lenitive until the line
objects are combined into a block definition
Explicitly set - ANSWER objects are created with that linetype regardless of the
current layer
Continuous - ANSWER displays an unbroken line
associative - ANSWER this hatch or fill is updated when you modify its boundary
objects
draw order - ANSWER allows you to place a hatch or fill behind or in front of objects or
hatch boundaries
