Module 3 Trade Terms Exam Q&A 100% Guaranteed Pass | Latest Update

Module 3 Trade Terms Exam Q&A 100%

Guaranteed Pass | Latest Update


adjustable wrench - ✔✔a smooth jawed wrench with an

adjustable jaw used for turning nuts and bolts. Crescent wrench.

ball peen hammer - ✔✔a hammer with a flat face that is used to

strike cold chisels and punches. The rounded end is used (the

peen) is used to bend and shape soft metal

bell faced hammer - ✔✔A claw hammer with a slightly rounded ,

or convex, face

Bevel - ✔✔To cut on a slant at an angle that is not a right angle.

The angle or inclination of a line or surface that meets another at

any angle except 90 degrees

Box end wrench - ✔✔A wrench, usually double ended, that has a

closed socket that fits over the head of a bolt.



1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.

, Cat's Paw - ✔✔A straight steel rod with a curved claw at one end

that is used to pull nails that have been driven flush with the

surface of the wood or slightly below it

Chisel - ✔✔A metal tool with a sharpened, beveled edge to cut

and shape wood, stone, or metal

Chisel bar - ✔✔A tool with a claw at each end, commonly used to

pull nails.

Claw hammer - ✔✔A hammer with a flat striking face. the other

end of the head is curved and divided into two claws to remove

nails.

Combination wrench - ✔✔A wrench with an open end and a

closed end. Turning hex and square nuts and bolts.

Dowel - ✔✔A pin, usually round, that fits into a corresponding

hole to fasten or align two pieces.

Fastener - ✔✔A hardware device that mechanically joins or

affixes two or more objects together.


2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.