and Answers 100% Solved | Graded A+
How many Training Hours and experience for a class D Water Operator -
✔✔16 Hours Training and No Experience
How many Training Hours and experience for a class C Water Operator -
✔✔36 Hours Training and 1 year Experience
How many Training Hours and experience for a class B Water Operator -
✔✔100 Hours Training and 3 years Experience (must include 1 year of
hands on experience)
How many Training Hours and experience for a class A Water Operator -
✔✔200 Hours Training and 5 years Experience (must include 2 years of
hands on experience)
How many Training Hours and experience for a Class C Lab Operator -
✔✔32 Hours and no experience
How many Training Hours and experience for a Class B Lab Operator -
✔✔32 hours of C and 32 hours of B and 6 months experience. ***associate
in science can substitute 32hrs of C level training
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
,How many Training Hours and experience for a Class A Lab Operator -
✔✔32 hours of B and 1 year experience. ***Must include a Bachelor in
science
How many Training Hours and experience for a Class C Distribution
Operator - ✔✔36hours and 1 year experience
How many Training Hours and experience for a Distribution Technician -
✔✔8 hours and no training.
Community Water System - ✔✔A public water supply that has at least 15
service connections or serves 25 or more persons on a regular basis
Primary Contaminants - ✔✔Contaminants identifies by the EPA as harmful
to umal health
Maximum Containment Level (MCL) - ✔✔The level in which contaminants
must not exceed or public notification is required.
Cryptosporidium - ✔✔A microsocpic parasite that can be found in water. It
produces cysts that are very resistant to harsh environmental conditions. It
is responsible for intestinal illness called cryptosporidiosis. Symptoms
include diarrhea, cramps, gas, bodily discomfort, fatigue, and weight loss.
Occurs one week after exposure and can last for 1-4 weeks
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, Disinfection Profiling - ✔✔A water system assesses the level of disinfection
currently provided and then determines the impact a proposed change in
disinfection practice would have.
E. coli - ✔✔A bacterium that is commonly used as an indicator of human
health risk from harmful micro organisms that can be present in water.
Symptoms include sever cramps and diarrhea. Blood is often seen in the
stool. Symptoms begin 1-9 days after exposure and last a week or less.
Giardia - ✔✔A microscopic parasite that can be found in water. It produces
cysts that are resistant to harsh environmental conditions. Giardia causes
intestinal illness called giardiasis. Symptoms simular to cryptosporidiosis.
Vomition, chills, headache and fever may also occur. Symptoms begin one
week after exposure and can last up to a month.
Hard Water - ✔✔A characteristic of water caused mainly by the salts of
calcium (Ca++) and magnesium (Mg++). Undesirable due to formation of
soap curds, increase use of soap, and scale deposits in boilers and water
heaters. Defines as having hardness of 100mg/L or greater
Maximum Residual Disinfectant Level (MDRLs) - ✔✔The highest level of
disinfectant allowed in drinking water. Standards set by the US EPA
Microbial Pathogens - ✔✔Micro-organisms that cause disease
3
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.