REVIT EXAM QUESTIONS WITH 100%
CORRECT ANSWERS 2024/2025
LATEST UPDATE
Which of the following commands creates a view that results in an independent view
displaying the same model geometry and containing a copy of the annotation? -
Answer-Duplicate with detailing
The purpose of callouts is to create... - Answer-View of part of the model that is linked to
the main view from which it is taken
You place dimensions in a view and some of them display and others do not. To display
the missing dimensions you need to modify the... - Answer-Annotation crop region
How do you create a jog in a building section - Answer-Use the split element tool in the
modify tab>modify panel
When creating a floor the boundary sketch must be... - Answer-Closed
How do you change the thickness of a floor - Answer-In the type selector, change the
floor type
Which of the following opening commands cuts an opening in multiple floors at the
same time? - Answer-Shaft
When creating a sloped floor (add point) - Answer-A point where several slopes
converge
When inserting a component, you select the family that you want to use in the... -
Answer-type selector
If the component you want to use is not available in the current project, where do you go
to get the component (select all that apply) - Answer-in another project, copy the
component to the clipboard and paste it into the current project
in the current project, use (load family) and select the family from the list in the dialog
box
, search Autodesk seek for a component and download it
when you use the moves with nearby elements option, can you control which elements
move with the component - Answer-no, it moves with the closest wall
Which of the following command would you use if you want to move a furniture
component to a floor that is lower than the level where it was originally placed? -
Answer-use (pick new host) and select the lower floor
To create a roof sloping in one direction only you would create a roof... - Answer-by
footprint and specify the slope along two parallel sides
To create a flat roof, which of the following commands would you use to draw a sketch
of the boundary of the room and to set its thickness? - Answer-roof by footprint with the
thickness set by the roof type
Which of the following methods makes a wall touch the underside of a roof? - Answer-
select the wall and use (attach top/base)
How do you modify a stair so that it is wider at the bottom than at the top? - Answer-
convert the run to sketch and modify the boundary and riser lines
when is (railing) needed (select all that apply) - Answer-when you want an extra railing
in the middle of very wide stairs
when create railings that are not attached to stairs or ramps
How do you specify the size of a sheet? - Answer-in the new sheet dialog box, select a
title block to control the sheet size
How is the title block information filled in (select all that apply) - Answer-select the title
block and select the label that you want to change
select the title block and modify in properties
some of the information is filled in automatically
on how many sheets can a view be placed? - Answer-one
which of the following is the best method to use if the size of a view is too large for
sheet? - Answer-activate the view and change the view scale
How do you set up a view on a sheet that only displays part of a floor plan? - Answer-
create a callout view displaying the part that you want to use and place the callout view
on the sheet
CORRECT ANSWERS 2024/2025
LATEST UPDATE
Which of the following commands creates a view that results in an independent view
displaying the same model geometry and containing a copy of the annotation? -
Answer-Duplicate with detailing
The purpose of callouts is to create... - Answer-View of part of the model that is linked to
the main view from which it is taken
You place dimensions in a view and some of them display and others do not. To display
the missing dimensions you need to modify the... - Answer-Annotation crop region
How do you create a jog in a building section - Answer-Use the split element tool in the
modify tab>modify panel
When creating a floor the boundary sketch must be... - Answer-Closed
How do you change the thickness of a floor - Answer-In the type selector, change the
floor type
Which of the following opening commands cuts an opening in multiple floors at the
same time? - Answer-Shaft
When creating a sloped floor (add point) - Answer-A point where several slopes
converge
When inserting a component, you select the family that you want to use in the... -
Answer-type selector
If the component you want to use is not available in the current project, where do you go
to get the component (select all that apply) - Answer-in another project, copy the
component to the clipboard and paste it into the current project
in the current project, use (load family) and select the family from the list in the dialog
box
, search Autodesk seek for a component and download it
when you use the moves with nearby elements option, can you control which elements
move with the component - Answer-no, it moves with the closest wall
Which of the following command would you use if you want to move a furniture
component to a floor that is lower than the level where it was originally placed? -
Answer-use (pick new host) and select the lower floor
To create a roof sloping in one direction only you would create a roof... - Answer-by
footprint and specify the slope along two parallel sides
To create a flat roof, which of the following commands would you use to draw a sketch
of the boundary of the room and to set its thickness? - Answer-roof by footprint with the
thickness set by the roof type
Which of the following methods makes a wall touch the underside of a roof? - Answer-
select the wall and use (attach top/base)
How do you modify a stair so that it is wider at the bottom than at the top? - Answer-
convert the run to sketch and modify the boundary and riser lines
when is (railing) needed (select all that apply) - Answer-when you want an extra railing
in the middle of very wide stairs
when create railings that are not attached to stairs or ramps
How do you specify the size of a sheet? - Answer-in the new sheet dialog box, select a
title block to control the sheet size
How is the title block information filled in (select all that apply) - Answer-select the title
block and select the label that you want to change
select the title block and modify in properties
some of the information is filled in automatically
on how many sheets can a view be placed? - Answer-one
which of the following is the best method to use if the size of a view is too large for
sheet? - Answer-activate the view and change the view scale
How do you set up a view on a sheet that only displays part of a floor plan? - Answer-
create a callout view displaying the part that you want to use and place the callout view
on the sheet
