Carpentry 2 Module 4 Questions and Answers | Latest Version | 2024/2025 | Correct & Verified

Carpentry 2 Module 4 Questions and Answers | Latest Version | 2024/2025 | Correct & Verified What is a "plumb cut" in carpentry? A cut made to ensure that the vertical element of a structure is perfectly upright What is the purpose of a saw kerf? To create a groove in the wood that helps the saw blade follow the intended line What does "measuring from the edge" mean in carpentry? To measure distances from the edge of a piece of wood to ensure precise cuts and accurate layout What is the purpose of a chalk line in carpentry? To mark long, straight lines on surfaces for cutting or aligning What is the primary function of a coping saw? To make curved cuts in wood 2 What is the purpose of a bevel gauge in carpentry? To measure and transfer angles onto a workpiece What is the difference between a crosscut and a rip cut? A crosscut is made across the grain, while a rip cut is made along the grain of the wood What is a dado joint used for? To join two pieces of wood by cutting a slot into one piece for the other piece to fit into What is the purpose of a wood chisel? To carve, shape, or remove wood from a workpiece What is a "birdsmouth cut" used for in framing? A cut made on the top of a rafter to fit securely on a wall plate What is the primary use of a tape measure in carpentry? To measure lengths, widths, and distances to ensure accurate cuts and placement 3 What does "mitering" mean in carpentry? Cutting two pieces of wood at an angle, typically 45 degrees, to form a corner joint What is the purpose of a framing hammer? To drive nails into framing lumber and other materials with a heavier head What is the purpose of a jigsaw in carpentry? To make intricate and curved cuts in wood or other materials What is a "scarf joint" in carpentry? A joint where two pieces of wood are joined end-to-end by matching angled cuts What is the role of a circular saw in carpentry? To make straight cuts through wood or other materials What is the function of a wood planer? To smooth and level the surface of wood by removing thin layers 4 What is the purpose of a block plane? To smooth and finish wood surfaces with fine adjustments