NEIEP 830 QUESTIONS AND ANSWERS 2024-25 A+ REVIEW SOLUTION

NEIEP 830 QUESTIONS AND ANSWERS 2024-25 A+ REVIEW SOLUTION Although typically horizontal in design, the maximum angle of inclination for the moving walk is ______ degrees - ANS-12 A ________ Volt , ______ amp outlet is required by asme for both the upper and lower truss - ANS- 115,15 True or False Water run off must be seperated before the discharge into the public drains - ANS- True For drive motors that require overspeed protection, it must stop the systems if speed exceeds ______ % of rated speed - ANS-20 The nameplate on the brake must indicate the ________ setting - ANS-Torque The _______ brake is similar to the brake system found on gearless traction elevators - ANS-Drum The drive end of a belted walkway is called the _______ ________ - ANS-Head end The tensioning device on the tail end of the belted moving walk is normally set at ______ lbs - ANS- 3000 The portion of the track system that guides the pallets around the turns are called the ______ tracks - ANS-Crab/circle True or false The lip track is used to restrain the step chain roller from up and down movement - ANS-...