Black Seal Test Questions with 100% Verified Correct Answers

Black Seal Test Questions with 100% Verified Correct Answers The ASME Code states that the setting on the high limit pressure control on a low pressure steam boiler shall not exceed: - Correct Answer 15 psig By definition, a boiler is an open vessel in which water is turned to steam under pressure by the application of heat. True or False? - Correct Answer False By N.J.A.C. rules, a school with a boiler plant with a total interconnected capacity of 100 BHP would require a properly licensed operator to be present whenever the building was deemed occupied. True or False? - Correct Answer False According to state boiler regulations, where should the boiler registration number be located? - Correct Answer on the front of the boiler A boiler operator's log shall be maintained in each plant containing over: - Correct Answer 100 Boiler Hp If in good standing, an expired license can be renewed within a period of: - Correct Answer 3 years The low pressure black seal license will permit you to operate boiler plants of up to: - Correct Answer no limit What is the maximum penalty for performing the duties of a boiler operator with an expired license? - Correct Answer $5,000.00 Where on the Certificate of Inspection would you find the State of New Jersey jurisdiction number? - Correct Answer upper left corner What is the maximum temperature and pressure a hot water supply boiler can have to be considered a low pressure boiler? - Correct Answer 160 psi at 250 degrees F The observed pressure of a heating system when it is in an idle or non-operating mode is called: - Correct Answer This is known as the static pressure of the system