Ammo CDC's set B Questions and
Answers Graded A+
What is the primary function of a hoist in an ammunition handling system?
✔✔To lift and move heavy ammunition or explosives safely.
What should be done before using a drill on ammunition equipment?
✔✔Ensure the drill is properly secured and that all safety precautions are in place.
How should a motor be checked before use in ammunition handling?
✔✔Inspect for proper lubrication, function, and any visible signs of wear or damage.
What is the proper procedure for using a grinder in an ammunition storage area?
✔✔Ensure the grinder is clean, the area is well-ventilated, and proper PPE is worn.
Why is it important to regularly inspect hoist equipment?
✔✔To prevent malfunctions and ensure safe lifting operations.
1
,What safety gear should be worn when operating heavy machinery like hoists or drills?
✔✔Appropriate personal protective equipment, such as gloves, safety goggles, and ear
protection.
How should a drill be maintained to ensure optimal performance?
✔✔Regular cleaning, proper storage, and timely replacement of worn-out parts.
What is a common issue that can occur with a hoist, and how should it be addressed?
✔✔A stuck or malfunctioning hoist; ensure the load is not exceeding the weight limit and that it
is serviced immediately.
What is the purpose of a motor in ammunition handling equipment?
✔✔To provide the necessary mechanical power for lifting, moving, or operating tools and
machinery.
How should a grinder be handled to minimize the risk of injury?
✔✔Ensure the grinder is stable, use two hands, and keep body parts clear of the grinding surface.
2
,What is a key consideration when using equipment like drills or grinders around ammunition?
✔✔Avoid sparks and ensure no ignition sources are present.
How often should hoist cables and chains be inspected for wear?
✔✔Regularly, with a visual check before each use and a more detailed inspection at regular
intervals.
What is the first step in using a motorized drill safely?
✔✔Verify that the drill is in good condition and all safety mechanisms are functioning.
What is the purpose of checking the brake system on a hoist before use?
✔✔To ensure that the hoist can safely stop and hold the load in place without risk of accidental
lowering.
What is the safest method for transporting a grinder to a work site?
✔✔Ensure it is powered off, properly stored in a carrying case, and transported securely.
What should be done if a motorized piece of equipment fails to start?
3
, ✔✔Check the power source, fuses, and any potential blockages before calling for professional
repair.
How can the risk of overheating be minimized when using a motor in heavy equipment?
✔✔Ensure the motor is well-ventilated, not overloaded, and maintained according to the
manufacturer's instructions.
What type of maintenance is required for hoist equipment?
✔✔Regular lubrication, checking for wear on ropes or chains, and verifying the operational
integrity of safety mechanisms.
What should be done if a drill bit becomes dull or damaged during use?
✔✔Stop using the drill and replace or sharpen the bit before resuming work.
How do you prevent excessive wear and tear on a grinder during operation?
✔✔Operate the grinder at the recommended speed and avoid excessive pressure on the tool.
Why is it important to ensure proper grounding of electric-powered drills and grinders?
4
Answers Graded A+
What is the primary function of a hoist in an ammunition handling system?
✔✔To lift and move heavy ammunition or explosives safely.
What should be done before using a drill on ammunition equipment?
✔✔Ensure the drill is properly secured and that all safety precautions are in place.
How should a motor be checked before use in ammunition handling?
✔✔Inspect for proper lubrication, function, and any visible signs of wear or damage.
What is the proper procedure for using a grinder in an ammunition storage area?
✔✔Ensure the grinder is clean, the area is well-ventilated, and proper PPE is worn.
Why is it important to regularly inspect hoist equipment?
✔✔To prevent malfunctions and ensure safe lifting operations.
1
,What safety gear should be worn when operating heavy machinery like hoists or drills?
✔✔Appropriate personal protective equipment, such as gloves, safety goggles, and ear
protection.
How should a drill be maintained to ensure optimal performance?
✔✔Regular cleaning, proper storage, and timely replacement of worn-out parts.
What is a common issue that can occur with a hoist, and how should it be addressed?
✔✔A stuck or malfunctioning hoist; ensure the load is not exceeding the weight limit and that it
is serviced immediately.
What is the purpose of a motor in ammunition handling equipment?
✔✔To provide the necessary mechanical power for lifting, moving, or operating tools and
machinery.
How should a grinder be handled to minimize the risk of injury?
✔✔Ensure the grinder is stable, use two hands, and keep body parts clear of the grinding surface.
2
,What is a key consideration when using equipment like drills or grinders around ammunition?
✔✔Avoid sparks and ensure no ignition sources are present.
How often should hoist cables and chains be inspected for wear?
✔✔Regularly, with a visual check before each use and a more detailed inspection at regular
intervals.
What is the first step in using a motorized drill safely?
✔✔Verify that the drill is in good condition and all safety mechanisms are functioning.
What is the purpose of checking the brake system on a hoist before use?
✔✔To ensure that the hoist can safely stop and hold the load in place without risk of accidental
lowering.
What is the safest method for transporting a grinder to a work site?
✔✔Ensure it is powered off, properly stored in a carrying case, and transported securely.
What should be done if a motorized piece of equipment fails to start?
3
, ✔✔Check the power source, fuses, and any potential blockages before calling for professional
repair.
How can the risk of overheating be minimized when using a motor in heavy equipment?
✔✔Ensure the motor is well-ventilated, not overloaded, and maintained according to the
manufacturer's instructions.
What type of maintenance is required for hoist equipment?
✔✔Regular lubrication, checking for wear on ropes or chains, and verifying the operational
integrity of safety mechanisms.
What should be done if a drill bit becomes dull or damaged during use?
✔✔Stop using the drill and replace or sharpen the bit before resuming work.
How do you prevent excessive wear and tear on a grinder during operation?
✔✔Operate the grinder at the recommended speed and avoid excessive pressure on the tool.
Why is it important to ensure proper grounding of electric-powered drills and grinders?
4
