CSX Quiz 1 With Correct Answers!!
Can we posse fire arms at work? Can we deface or destroy CSX property? Can we
read literature that's unrelated to work? Can we interfere with a safety device? -
ANSWERThe answer is no to all of theses even though some certified CSX workers
are allowed to carry firearms.
Can you put in pay for yourself and you fellow crew member's? - ANSWERYes
If there is no rule that cover it what shall you do? - ANSWERTake the safest course
What is the indication for a hand flag or lantern signal that is swung at right angle to
the track? - ANSWERSTOP
Before lining a switch, the employee must first ensure that there are no conflicting
movement, or that there is no obstruction that will interfere with the movement of the
switch, what else is required? Two answers* - ANSWER1.) Any preceding
movement has passed the clearance point and 2.) The device is not locked,
clamped, spiked or tagged.
If a lock is determined to be defective on a switch or derail, you should replace the
lock, if a lock is not available, what should you do? - ANSWERCall the train
dispatcher, and wait for further instructions
slight horizontal movement to arm's length at right angle to the track -
ANSWERReduce speed
Hold at arms length above the head when equipment is standing? -
ANSWERRelease air brakes
who authorizes a utility employee commence work with an assigning crew? -
ANSWERRanking crew member
T/F is it permissible to leave one end of a crossover line for straight-a-way
movement and the other end lined for cross over movement? - ANSWERFalse
What is the normal position of a derail? - ANSWERIn the on, in the derail position
When an employee determines a switch or derail to be defective what should you
do? - ANSWERTag it, Report it, You can't operate it,
Your switching cars in a yard, using multiple switches on a leap, after lining each
switch, you must make certain that you what? - ANSWERthe switch points fit
properly
Can we posse fire arms at work? Can we deface or destroy CSX property? Can we
read literature that's unrelated to work? Can we interfere with a safety device? -
ANSWERThe answer is no to all of theses even though some certified CSX workers
are allowed to carry firearms.
Can you put in pay for yourself and you fellow crew member's? - ANSWERYes
If there is no rule that cover it what shall you do? - ANSWERTake the safest course
What is the indication for a hand flag or lantern signal that is swung at right angle to
the track? - ANSWERSTOP
Before lining a switch, the employee must first ensure that there are no conflicting
movement, or that there is no obstruction that will interfere with the movement of the
switch, what else is required? Two answers* - ANSWER1.) Any preceding
movement has passed the clearance point and 2.) The device is not locked,
clamped, spiked or tagged.
If a lock is determined to be defective on a switch or derail, you should replace the
lock, if a lock is not available, what should you do? - ANSWERCall the train
dispatcher, and wait for further instructions
slight horizontal movement to arm's length at right angle to the track -
ANSWERReduce speed
Hold at arms length above the head when equipment is standing? -
ANSWERRelease air brakes
who authorizes a utility employee commence work with an assigning crew? -
ANSWERRanking crew member
T/F is it permissible to leave one end of a crossover line for straight-a-way
movement and the other end lined for cross over movement? - ANSWERFalse
What is the normal position of a derail? - ANSWERIn the on, in the derail position
When an employee determines a switch or derail to be defective what should you
do? - ANSWERTag it, Report it, You can't operate it,
Your switching cars in a yard, using multiple switches on a leap, after lining each
switch, you must make certain that you what? - ANSWERthe switch points fit
properly
