CSX Conductor Week 5 Equipment
Handling Correct Questions &
Answers!!
A computer-generated document consisting of some or all of the following: Tonnage
Graph, Restricted and Special Handling List, CT-168 Report, Clearance Bureau
Instructions, and Hazardous Material Descriptions, Hazardous Special Handling
Instructions, Hazardous Materials Radio Waybill Form. - ANSWERCSXT Train
Documentation
A car with only a center sill structure designated to carry containers or trailers. -
ANSWERSpine Car
What must freight train crews have in their possession before their train departs it's
originating point? - ANSWERCSXT Train Documentation
Who may authorize a train to depart its origination station without CSXT train
documentation? - ANSWERChief Train Dispatcher
Any shipment that exceeds a published clearance limitation for the specified route of
movement and/or requires specific operating handling procedures for safe
movement. - ANSWERClearance-implicated shipment
A multi-car bodied car whose adjacent car bodies share a common truck -
ANSWERArticulated Car
A car designated to carry a trailer or container(s). When carrying containers, one
container may be placed on top of another. - ANSWERDouble Stack car
Where will you find the required documentation to move hazardous materials? -
ANSWERUnited States Hazardous Materials Instruction for Railroad
When relieved before reaching your final destination, what must you do with any
CSXT Train Documentation and/or alternatives? - ANSWERLeave on the lead
Locomotive so that the next crew can find it.
When must train crews have in their possessions a 200-degree Tempilstik and six
Hot Box/ Air Brake Cut-Out tags? - ANSWERBefore your train departs.
When setting out defective equipment, where must you try to place it? -
ANSWERWhere it can be accessed by a vehicle to be fixed.
Who must know that cars in their trains have received a proper inspection? -
ANSWERConductors
, Conductors must accept the results of any inspection performed by whom? -
ANSWERMechanical Department
Who is responsible for ensuring cars and locomotives receive the required
inspections and brake test? - ANSWEREach crewmember
Before pulling cars from industries, conductors must inspect the cars to determine if
they are? - ANSWERSafe for movement, Have been damaged by the customer
during loading or unloading.
To report customer damage which code do you use? - ANSWERException code
"RM" and reason code "CD"
When a car is unsafe for movement, whom must you ask for instructions? -
ANSWERTrain Dispatcher or Yard Master
When moving equipment that has a hot bearing what speed must you not exceed?
And must you cut out the air brake? - ANSWER4 mph and yes
When passing a over a wheel impact detector, what speed must you maintain, to the
extent possible? - ANSWERMaximum speed permitted
What actions must you take when the inspections results message indicates a High
Impact? - ANSWERStop and Inspect.
When a train is passing or is being passed visually inspect the train for defects and
other unsafe conditions such as? - ANSWERHot Journals, sticking brakes, sliding
wheels, dragging brakes, evidence of fire, insecure or dangerously shifted lading.
When inspecting a passing train from the ground where must you not stand? -
ANSWERCloser than 30 feet from passing train, between the rails of adjacent tracks.
Whom must you contact for instructions if the inspections results message was not
received or was not clearly received? - ANSWERTrain Dispatcher
When a high impact is reported by a wheel impact detector, what must you inspect
for the cause if the car number is reported? - ANSWERInspect the wheel on reported
car.
When a high impact is reported by a wheel impact detector, what must you inspect
for the cause if the axle number is reported? - ANSWERInspect the wheels on
reported axle.
When a high impact is reported by a wheel impact detector, what must you inspect
for the cause if the axle number is reported and the high impact cause is not found at
the reported location? - ANSWERInspect 20 axles in either direction from the
reported location.
Handling Correct Questions &
Answers!!
A computer-generated document consisting of some or all of the following: Tonnage
Graph, Restricted and Special Handling List, CT-168 Report, Clearance Bureau
Instructions, and Hazardous Material Descriptions, Hazardous Special Handling
Instructions, Hazardous Materials Radio Waybill Form. - ANSWERCSXT Train
Documentation
A car with only a center sill structure designated to carry containers or trailers. -
ANSWERSpine Car
What must freight train crews have in their possession before their train departs it's
originating point? - ANSWERCSXT Train Documentation
Who may authorize a train to depart its origination station without CSXT train
documentation? - ANSWERChief Train Dispatcher
Any shipment that exceeds a published clearance limitation for the specified route of
movement and/or requires specific operating handling procedures for safe
movement. - ANSWERClearance-implicated shipment
A multi-car bodied car whose adjacent car bodies share a common truck -
ANSWERArticulated Car
A car designated to carry a trailer or container(s). When carrying containers, one
container may be placed on top of another. - ANSWERDouble Stack car
Where will you find the required documentation to move hazardous materials? -
ANSWERUnited States Hazardous Materials Instruction for Railroad
When relieved before reaching your final destination, what must you do with any
CSXT Train Documentation and/or alternatives? - ANSWERLeave on the lead
Locomotive so that the next crew can find it.
When must train crews have in their possessions a 200-degree Tempilstik and six
Hot Box/ Air Brake Cut-Out tags? - ANSWERBefore your train departs.
When setting out defective equipment, where must you try to place it? -
ANSWERWhere it can be accessed by a vehicle to be fixed.
Who must know that cars in their trains have received a proper inspection? -
ANSWERConductors
, Conductors must accept the results of any inspection performed by whom? -
ANSWERMechanical Department
Who is responsible for ensuring cars and locomotives receive the required
inspections and brake test? - ANSWEREach crewmember
Before pulling cars from industries, conductors must inspect the cars to determine if
they are? - ANSWERSafe for movement, Have been damaged by the customer
during loading or unloading.
To report customer damage which code do you use? - ANSWERException code
"RM" and reason code "CD"
When a car is unsafe for movement, whom must you ask for instructions? -
ANSWERTrain Dispatcher or Yard Master
When moving equipment that has a hot bearing what speed must you not exceed?
And must you cut out the air brake? - ANSWER4 mph and yes
When passing a over a wheel impact detector, what speed must you maintain, to the
extent possible? - ANSWERMaximum speed permitted
What actions must you take when the inspections results message indicates a High
Impact? - ANSWERStop and Inspect.
When a train is passing or is being passed visually inspect the train for defects and
other unsafe conditions such as? - ANSWERHot Journals, sticking brakes, sliding
wheels, dragging brakes, evidence of fire, insecure or dangerously shifted lading.
When inspecting a passing train from the ground where must you not stand? -
ANSWERCloser than 30 feet from passing train, between the rails of adjacent tracks.
Whom must you contact for instructions if the inspections results message was not
received or was not clearly received? - ANSWERTrain Dispatcher
When a high impact is reported by a wheel impact detector, what must you inspect
for the cause if the car number is reported? - ANSWERInspect the wheel on reported
car.
When a high impact is reported by a wheel impact detector, what must you inspect
for the cause if the axle number is reported? - ANSWERInspect the wheels on
reported axle.
When a high impact is reported by a wheel impact detector, what must you inspect
for the cause if the axle number is reported and the high impact cause is not found at
the reported location? - ANSWERInspect 20 axles in either direction from the
reported location.
