©THEBRIGHT EXAM SOLUTIONS
11/8/2024 12:08 PM
Btec Applied Science Unit 3 Exam Questions
And Answers 100% Pass
What is a hypothesis? - answer✔An Idea that you can test using practical experiments
What are the Key features of a good hypothesis? - answer✔A good Hypothesis must:
Be able to be tested scientifically
Relate one dependent variable to on independent variable
What is a Null Hypothesis? - answer✔States that there is no relationship or causality, for example, no
relation between the temperature and the rate of reaction.
What does qualitative data refer to? - answer✔It refers to the appearance or value of something, such
as the colour observed or whether the bubbles are produced.
What does Quantitative data refer to? - answer✔It refers to numerical measurements made, such as the
volumes and times measured.
What is SOP? - answer✔The Standard Operating Procedure. This is an established procedure or method
used to carry out a routine activity. It ensures consistent results every time.
What are some examples of SOPs? - answer✔Titration, Handling of chemicals, disposal of waste,
qualitative analytical tests, preparing solutions
What are risk assessments? - answer✔It identifies hazards, evaluates the risks associated with those
hazards and it determines ways to eliminate or control those risks.
What is a Hazard? - answer✔When the equipment or substance can cause harm, for example a hot plate
or hydrochloric acid
What is a risk? - answer✔The harm that the hazard could cause and the chances of it happening, for
example the risk of using a hot plate is getting burnt.
What is the independent variable? - answer✔The variables you change during an investigation.
What is the Dependent variable? - answer✔The variables you are investigating and measure during an
investigation.
, ©THEBRIGHT EXAM SOLUTIONS
11/8/2024 12:08 PM
What is the control variable? - answer✔The variables you keep constant during an investigation.
What should a method be? - answer✔A step-by-step set of instructions, Be logically ordered, allows you
to take sensible measurements, and allows you to test your hypothesis.
When planning your method what do you need to make sure? - answer✔That it will procedure a range
of results, reliable results, precise results, and accurate results.
What are some types of data? - answer✔The data can be continuous such as the age of plant ir number
of plants. Some data can be a mixture of numbers and names such as the number of different types of
plants found in a garden.
What data is normally displayed on a bar chart? - answer✔Continuous data. You need to make sure its a
smooth curve of best fit, and that the curve goes through or near most of the points.
What are bar charts used for? - answer✔They are used for discrete data but can be used to compare
different sets of data.
What is the Pattern on the graph? - answer✔The shape of the graph. It is the line that goes up as time
goes by but eventually levels off
What is the trend on a graph? - answer✔The relationship between factors on the graph or in the table.
The full trend is that the volume increases as the time increases but then levels off after a certain
amount of time.
What is the sample size? - answer✔The number of people sampled in the investigation. To be confident
in your conclusions you need a large sample size to give strong evidence.
What is Primary data? - answer✔This is the data that you have gathered for yourself through the
experiments or investigations .
What is secondary data? - answer✔The data that you get in books, scientific papers or the internet. You
should compare your primary and secondary data to draw a conclusion
How do you know if the data is anomalous? - answer✔It doesn't fit into the pattern of the other results.
It does not lie close to the line of best fit.
What can cause the anomalous data? - answer✔Not following the method correctly. inaccurate
measuring/recording and impurities.
What is systemic error? - answer✔The error that is built into the method or equipment which you are
using. This can be corrected by calibrating the balance. These errors are quantitative.
What is the random error? - answer✔These are due to not following the method correctly and can be
minimized by repeating results and taking averages.
What can misreading the observations cause - answer✔They can cause qualitative errors.
11/8/2024 12:08 PM
Btec Applied Science Unit 3 Exam Questions
And Answers 100% Pass
What is a hypothesis? - answer✔An Idea that you can test using practical experiments
What are the Key features of a good hypothesis? - answer✔A good Hypothesis must:
Be able to be tested scientifically
Relate one dependent variable to on independent variable
What is a Null Hypothesis? - answer✔States that there is no relationship or causality, for example, no
relation between the temperature and the rate of reaction.
What does qualitative data refer to? - answer✔It refers to the appearance or value of something, such
as the colour observed or whether the bubbles are produced.
What does Quantitative data refer to? - answer✔It refers to numerical measurements made, such as the
volumes and times measured.
What is SOP? - answer✔The Standard Operating Procedure. This is an established procedure or method
used to carry out a routine activity. It ensures consistent results every time.
What are some examples of SOPs? - answer✔Titration, Handling of chemicals, disposal of waste,
qualitative analytical tests, preparing solutions
What are risk assessments? - answer✔It identifies hazards, evaluates the risks associated with those
hazards and it determines ways to eliminate or control those risks.
What is a Hazard? - answer✔When the equipment or substance can cause harm, for example a hot plate
or hydrochloric acid
What is a risk? - answer✔The harm that the hazard could cause and the chances of it happening, for
example the risk of using a hot plate is getting burnt.
What is the independent variable? - answer✔The variables you change during an investigation.
What is the Dependent variable? - answer✔The variables you are investigating and measure during an
investigation.
, ©THEBRIGHT EXAM SOLUTIONS
11/8/2024 12:08 PM
What is the control variable? - answer✔The variables you keep constant during an investigation.
What should a method be? - answer✔A step-by-step set of instructions, Be logically ordered, allows you
to take sensible measurements, and allows you to test your hypothesis.
When planning your method what do you need to make sure? - answer✔That it will procedure a range
of results, reliable results, precise results, and accurate results.
What are some types of data? - answer✔The data can be continuous such as the age of plant ir number
of plants. Some data can be a mixture of numbers and names such as the number of different types of
plants found in a garden.
What data is normally displayed on a bar chart? - answer✔Continuous data. You need to make sure its a
smooth curve of best fit, and that the curve goes through or near most of the points.
What are bar charts used for? - answer✔They are used for discrete data but can be used to compare
different sets of data.
What is the Pattern on the graph? - answer✔The shape of the graph. It is the line that goes up as time
goes by but eventually levels off
What is the trend on a graph? - answer✔The relationship between factors on the graph or in the table.
The full trend is that the volume increases as the time increases but then levels off after a certain
amount of time.
What is the sample size? - answer✔The number of people sampled in the investigation. To be confident
in your conclusions you need a large sample size to give strong evidence.
What is Primary data? - answer✔This is the data that you have gathered for yourself through the
experiments or investigations .
What is secondary data? - answer✔The data that you get in books, scientific papers or the internet. You
should compare your primary and secondary data to draw a conclusion
How do you know if the data is anomalous? - answer✔It doesn't fit into the pattern of the other results.
It does not lie close to the line of best fit.
What can cause the anomalous data? - answer✔Not following the method correctly. inaccurate
measuring/recording and impurities.
What is systemic error? - answer✔The error that is built into the method or equipment which you are
using. This can be corrected by calibrating the balance. These errors are quantitative.
What is the random error? - answer✔These are due to not following the method correctly and can be
minimized by repeating results and taking averages.
What can misreading the observations cause - answer✔They can cause qualitative errors.
