CSX Speed Rules Practice
Warning signs may be placed up to ____ minutes before the working limits become
effective, as long as the employee in charge is available to communicate with any train
approaching the working limits. - ✔️✔️30
_________ is a speed that will permit stopping within one-half the range of vision. It will
also permit stopping short of a train, a car, an obstruction, a stop signal, a derail, or an
improperly aligned switch. It will not exceed ____ MPH. - ✔️✔️Restricted Speed, 15
Permanent speed restrictions are indicated at the beginning of the restriction by a:
__________ ___________ ___________ sign. - ✔️✔️Permanent Reduce Speed
A permanent end restriction sign will be located at the: ______ of the __________ -
✔️✔️End restriction
The locations of permanent speed restrictions are identified in special instructions in
the: ____________. - ✔️✔️Timetable
When one speed is shown on a Permanent Reduce Speed sign, it indicates the speed
permitted for ________ trains. - ✔️✔️All
A warning sign will be loacted at least ____ miles before the restriction . - ✔️✔️2
On controlled tracks, the loaction of work force limits are designated on the
___________ ___________. - ✔️✔️Dispatcher Message
Per rule 46, trains using other than main or signaled tracks must move at a speed that
will permit stopping within one-half the range of vision short of a _______, ____,
__________, ________, __________ aligned switch, on track equipment, or a _____
signal. - ✔️✔️train, car, obstruction, derail, improperly, stop
The following speeds must not be exceeded per rule 46 (Tracks); _____ MPH on non-
signaled siding. - ✔️✔️25
The following speeds must not be exceeded per rule 46(Tracks); _____ MPH on other
than main track, or signaled tracks, such as in yards. - ✔️✔️10
The following speeds must not be exceeded per rule 46(Tracks); within an engine
service area or car shop repair area. - ✔️✔️5
Warning signs may be placed up to ____ minutes before the working limits become
effective, as long as the employee in charge is available to communicate with any train
approaching the working limits. - ✔️✔️30
_________ is a speed that will permit stopping within one-half the range of vision. It will
also permit stopping short of a train, a car, an obstruction, a stop signal, a derail, or an
improperly aligned switch. It will not exceed ____ MPH. - ✔️✔️Restricted Speed, 15
Permanent speed restrictions are indicated at the beginning of the restriction by a:
__________ ___________ ___________ sign. - ✔️✔️Permanent Reduce Speed
A permanent end restriction sign will be located at the: ______ of the __________ -
✔️✔️End restriction
The locations of permanent speed restrictions are identified in special instructions in
the: ____________. - ✔️✔️Timetable
When one speed is shown on a Permanent Reduce Speed sign, it indicates the speed
permitted for ________ trains. - ✔️✔️All
A warning sign will be loacted at least ____ miles before the restriction . - ✔️✔️2
On controlled tracks, the loaction of work force limits are designated on the
___________ ___________. - ✔️✔️Dispatcher Message
Per rule 46, trains using other than main or signaled tracks must move at a speed that
will permit stopping within one-half the range of vision short of a _______, ____,
__________, ________, __________ aligned switch, on track equipment, or a _____
signal. - ✔️✔️train, car, obstruction, derail, improperly, stop
The following speeds must not be exceeded per rule 46 (Tracks); _____ MPH on non-
signaled siding. - ✔️✔️25
The following speeds must not be exceeded per rule 46(Tracks); _____ MPH on other
than main track, or signaled tracks, such as in yards. - ✔️✔️10
The following speeds must not be exceeded per rule 46(Tracks); within an engine
service area or car shop repair area. - ✔️✔️5
