CDC 2w051 set B
The purpose of the transport beam beneath the lift arm assemblies on the MJ-1 series
lift truck is to - ✔️✔️provide added support and to relieve hydraulic pressure from the
lift arms when carrying loads for long distances
When the MHU-141 trailer is loaded or towed with the hinged deck open, what must be
done? - ✔️✔️The deck-panel supports must be properly positioned and locked in place
with quick-release pins.
Which subassembly of the universal ammunition loading system (UALS) house a
remaining indicator window that provides the means to visually determine the
approximate number of rounds in the unit? - ✔️✔️outer drum
The purpose of cutting lubricant in most drilling operations is to increase the -
✔️✔️drilling speed and the drill bit life
which minimum articles of safety gear must be worn when using a bench grinder -
✔️✔️Eye and Face protection
An Electrical saw blade must be operating at what speed before it contacts the material
being cut? - ✔️✔️Full
How many pounds per square inch (psi) of clean, dry air is required at the tool end of
the air hose to ensure the tool is operating safely and efficiently? - ✔️✔️90
What condition would prevent an operator rom applying power to a hoist or other
powered lifting device? - ✔️✔️An AF Form 979 is attached to the unit.
What should be worn anytime there is a potential for injury from overhead objects during
a lifting operation. - ✔️✔️Protective helmets
What is the most common type of lifting sling used in the munitions career field? -
✔️✔️Wire rope
The following are all good safety practices to follow when using a lifting sling except -
✔️✔️inspecting the sling by passing your bare hand over the body of the sling
The annunciators displayed on the Fluke 8025 series millimeter are used to distinguish
among. - ✔️✔️Ohms, Kilohms, and megohms
What are the two operational modes of the Fluke 8025-series multimeter? -
✔️✔️Range and hold
,The sterring system on the MHU-141/M trailer has a turning radius of how many
inches? - ✔️✔️200
What is the maximum load capacity of the MHU-110/M trailer? - ✔️✔️15,000 pounds
The parking brake on the MHU-110/M is applied by - ✔️✔️pulling either one of two
hand levers located on each side of the front of trailer.
How many openings (hinged door panels) are on the deck of the MHU-226 trailer? -
✔️✔️three
What type of steering aids the MHU-226 in a tighter steering radius? - ✔️✔️Four-wheel
double Ackerman
What kind of movement supports on-base activities to or from the flightline? -
✔️✔️Operational
After 463L pallets are positioned trailer, what can you use to secure the pallets to the
trailer? - ✔️✔️MB-1 chain assemblies and/or tie-down straps
What munitions item is not loaded into transport modules by munitions personnel? -
✔️✔️20mm
What transport module used for decoy munitions has a maximum capacity of 30
magazines? - ✔️✔️ALE-50
How often should the positive locking device on the doors of munitions transport
modules be checked? - ✔️✔️After loading, unloading, and periodically between stops
What is the lifting capacity of the MJ-1 series lift truck? - ✔️✔️3,000 pounds
What is the lifting capacity of the MHU-83-series lift truck? - ✔️✔️7,000 pounds
when using the MHU-83 series lift with fork adapters, you immediately - ✔️✔️reduce
the lifting capability by 1000 pounds
what happens when you release the accelerator pedal on vehicle driven with a
hydrostatic transmission? - ✔️✔️the unit coast to a stop very quickly
, what is the primary drawback to using the hydraulic hand pump to build hydraulic
pressure on the MHU-83 series lift truck? - ✔️✔️extremely slow way to build hydraulic
pressure
How is the yaw positioning from the cradle or boom controls of an MJ-1 lift truck
adjusted? - ✔️✔️Manually
what category or categories are Air Force air compressors classified? - ✔️✔️High or
low pressure
Before using an electrical drill, what is the first thing you should do? - ✔️✔️Make sure
the diameter of the hole to be drilled is within the capacity of the drill.
The primary difference between a bobtail and a pickup truck is the - ✔️✔️bobtail's back
end is shortened by about one half
what is the purpose behind good operator maintenance of all assigned vehicles? -
✔️✔️maintain vehicle serviceability at reduced cost
what is the maximum amount of pounds the MB-4 aircraft towing tractor can tow and
push? - ✔️✔️140,000
Pintle safety locking pins must remain attached to the pintle assembly - ✔️✔️to prevent
an unsecure pin from coming out and getting lost.
what gear range should be selected in a tractor with an automatic transmission while
going downhill? - ✔️✔️low range
what is the purpose of the trailer hand valve ( Johnson Bar)? - ✔️✔️Test the trailer
brakes
What are hose couplers (glad hands) used for on tractor/trailer combinations? - ✔️✔️to
connect the service and emergency brake airlines from the tractor to the trailer
Which procedure is not a consideration for backing a tractor/trailer combination? -
✔️✔️turn toward the passenger's side.
What is the maximum depth of water you may drive a rough-terrain forklift through? -
✔️✔️5 feet
What is the most beneficial attribute of using the swingmaster forklift? - ✔️✔️allows you
to maximize the available storage space.
. with the forks level, what is the maximum reach of the variable-reach forklift? -
✔️✔️22 feet
The purpose of the transport beam beneath the lift arm assemblies on the MJ-1 series
lift truck is to - ✔️✔️provide added support and to relieve hydraulic pressure from the
lift arms when carrying loads for long distances
When the MHU-141 trailer is loaded or towed with the hinged deck open, what must be
done? - ✔️✔️The deck-panel supports must be properly positioned and locked in place
with quick-release pins.
Which subassembly of the universal ammunition loading system (UALS) house a
remaining indicator window that provides the means to visually determine the
approximate number of rounds in the unit? - ✔️✔️outer drum
The purpose of cutting lubricant in most drilling operations is to increase the -
✔️✔️drilling speed and the drill bit life
which minimum articles of safety gear must be worn when using a bench grinder -
✔️✔️Eye and Face protection
An Electrical saw blade must be operating at what speed before it contacts the material
being cut? - ✔️✔️Full
How many pounds per square inch (psi) of clean, dry air is required at the tool end of
the air hose to ensure the tool is operating safely and efficiently? - ✔️✔️90
What condition would prevent an operator rom applying power to a hoist or other
powered lifting device? - ✔️✔️An AF Form 979 is attached to the unit.
What should be worn anytime there is a potential for injury from overhead objects during
a lifting operation. - ✔️✔️Protective helmets
What is the most common type of lifting sling used in the munitions career field? -
✔️✔️Wire rope
The following are all good safety practices to follow when using a lifting sling except -
✔️✔️inspecting the sling by passing your bare hand over the body of the sling
The annunciators displayed on the Fluke 8025 series millimeter are used to distinguish
among. - ✔️✔️Ohms, Kilohms, and megohms
What are the two operational modes of the Fluke 8025-series multimeter? -
✔️✔️Range and hold
,The sterring system on the MHU-141/M trailer has a turning radius of how many
inches? - ✔️✔️200
What is the maximum load capacity of the MHU-110/M trailer? - ✔️✔️15,000 pounds
The parking brake on the MHU-110/M is applied by - ✔️✔️pulling either one of two
hand levers located on each side of the front of trailer.
How many openings (hinged door panels) are on the deck of the MHU-226 trailer? -
✔️✔️three
What type of steering aids the MHU-226 in a tighter steering radius? - ✔️✔️Four-wheel
double Ackerman
What kind of movement supports on-base activities to or from the flightline? -
✔️✔️Operational
After 463L pallets are positioned trailer, what can you use to secure the pallets to the
trailer? - ✔️✔️MB-1 chain assemblies and/or tie-down straps
What munitions item is not loaded into transport modules by munitions personnel? -
✔️✔️20mm
What transport module used for decoy munitions has a maximum capacity of 30
magazines? - ✔️✔️ALE-50
How often should the positive locking device on the doors of munitions transport
modules be checked? - ✔️✔️After loading, unloading, and periodically between stops
What is the lifting capacity of the MJ-1 series lift truck? - ✔️✔️3,000 pounds
What is the lifting capacity of the MHU-83-series lift truck? - ✔️✔️7,000 pounds
when using the MHU-83 series lift with fork adapters, you immediately - ✔️✔️reduce
the lifting capability by 1000 pounds
what happens when you release the accelerator pedal on vehicle driven with a
hydrostatic transmission? - ✔️✔️the unit coast to a stop very quickly
, what is the primary drawback to using the hydraulic hand pump to build hydraulic
pressure on the MHU-83 series lift truck? - ✔️✔️extremely slow way to build hydraulic
pressure
How is the yaw positioning from the cradle or boom controls of an MJ-1 lift truck
adjusted? - ✔️✔️Manually
what category or categories are Air Force air compressors classified? - ✔️✔️High or
low pressure
Before using an electrical drill, what is the first thing you should do? - ✔️✔️Make sure
the diameter of the hole to be drilled is within the capacity of the drill.
The primary difference between a bobtail and a pickup truck is the - ✔️✔️bobtail's back
end is shortened by about one half
what is the purpose behind good operator maintenance of all assigned vehicles? -
✔️✔️maintain vehicle serviceability at reduced cost
what is the maximum amount of pounds the MB-4 aircraft towing tractor can tow and
push? - ✔️✔️140,000
Pintle safety locking pins must remain attached to the pintle assembly - ✔️✔️to prevent
an unsecure pin from coming out and getting lost.
what gear range should be selected in a tractor with an automatic transmission while
going downhill? - ✔️✔️low range
what is the purpose of the trailer hand valve ( Johnson Bar)? - ✔️✔️Test the trailer
brakes
What are hose couplers (glad hands) used for on tractor/trailer combinations? - ✔️✔️to
connect the service and emergency brake airlines from the tractor to the trailer
Which procedure is not a consideration for backing a tractor/trailer combination? -
✔️✔️turn toward the passenger's side.
What is the maximum depth of water you may drive a rough-terrain forklift through? -
✔️✔️5 feet
What is the most beneficial attribute of using the swingmaster forklift? - ✔️✔️allows you
to maximize the available storage space.
. with the forks level, what is the maximum reach of the variable-reach forklift? -
✔️✔️22 feet
