©JOSHCLAY 2024/2025. YEAR PUBLISHED 2024.
EPIC INP 401 Exam Questions and
Answers 100% Solved | Graded A+
2-At which of the three levels for procedure order configuration (Procedure,
Procedure Category, or System Definitions) could you potentially do ALL of
your build? Why would this be a bad idea? - ✔✔It is possible to make all
settings at the Procedure (EAP) level. However, doing so would be
inefficient and difficult to maintain.
2-True or False? Linking your Procedures to a Procedure Category is
optional. - ✔✔False. All Procedures must be linked to a Procedure
Category. The link is made in the Procedure record.
2-On which screen are the buttons for priority and frequency that display in
the Order Composer configured? - ✔✔Buttons for priority and frequency
are set on the Inpatient Order Composer Button Selections - I screen (also
referred to as the tic-tac-toe screen).
2-At which of the three levels for procedure order configuration (Procedure,
Procedure Category, or System Definitions) can you set a default
frequency? - ✔✔A default frequency can be set at the Procedure (EAP) or
, ©JOSHCLAY 2024/2025. YEAR PUBLISHED 2024.
Procedure Category (EDP) level. Refer to the Where Can Settings Be
Made table earlier in this chapter.
3-You remove Priority from the display items for your diet orders. But when
you test one of your diet orders, Priority shows up as the last display item.
What might be causing that? - ✔✔Priority is probably a required item.
Check the item control fields in the Procedure, Procedure Category, and
System Definitions. A required item will always display, even if it's not a
display item.
3-True or False? If there are Item Control settings in OCCs at both the
Procedure and Procedure Category level, the settings at the Category level
will not affect the order. - ✔✔False. Item Control is cumulative, so settings
from both the Category and Procedure level OCCs will affect the order.
3-Your facility decides that all diet orders don't need to display a Priority.
How can you make that change? At which level (Procedure, Procedure
Category, or System Definitions) would you make that change? - ✔✔If you
don't want to display a Priority, Priority should NOT be listed as a display
item in the OCC. You'll also need to use item control to set Priority to "not
required" in the OCC record. (Remember, required items will always
display!)
EPIC INP 401 Exam Questions and
Answers 100% Solved | Graded A+
2-At which of the three levels for procedure order configuration (Procedure,
Procedure Category, or System Definitions) could you potentially do ALL of
your build? Why would this be a bad idea? - ✔✔It is possible to make all
settings at the Procedure (EAP) level. However, doing so would be
inefficient and difficult to maintain.
2-True or False? Linking your Procedures to a Procedure Category is
optional. - ✔✔False. All Procedures must be linked to a Procedure
Category. The link is made in the Procedure record.
2-On which screen are the buttons for priority and frequency that display in
the Order Composer configured? - ✔✔Buttons for priority and frequency
are set on the Inpatient Order Composer Button Selections - I screen (also
referred to as the tic-tac-toe screen).
2-At which of the three levels for procedure order configuration (Procedure,
Procedure Category, or System Definitions) can you set a default
frequency? - ✔✔A default frequency can be set at the Procedure (EAP) or
, ©JOSHCLAY 2024/2025. YEAR PUBLISHED 2024.
Procedure Category (EDP) level. Refer to the Where Can Settings Be
Made table earlier in this chapter.
3-You remove Priority from the display items for your diet orders. But when
you test one of your diet orders, Priority shows up as the last display item.
What might be causing that? - ✔✔Priority is probably a required item.
Check the item control fields in the Procedure, Procedure Category, and
System Definitions. A required item will always display, even if it's not a
display item.
3-True or False? If there are Item Control settings in OCCs at both the
Procedure and Procedure Category level, the settings at the Category level
will not affect the order. - ✔✔False. Item Control is cumulative, so settings
from both the Category and Procedure level OCCs will affect the order.
3-Your facility decides that all diet orders don't need to display a Priority.
How can you make that change? At which level (Procedure, Procedure
Category, or System Definitions) would you make that change? - ✔✔If you
don't want to display a Priority, Priority should NOT be listed as a display
item in the OCC. You'll also need to use item control to set Priority to "not
required" in the OCC record. (Remember, required items will always
display!)
