TestOut Network Pro Ch 1 and 2 (1.1.5, 1.2.3,
1.3.6, 1.4.4, 1.5.5, 1.6.3, 2.1.4, 2.2.4, 2.3.4,
2.4.8, 2.5.7 Questions With Solutions 100%
Solved
Which of the following topologies connects all devices to a trunk cable? Bus
Which of the following topologies connects each device to a neighboring device? Ring
In which of the following topolgies does each device on the netowrk act as a repeater, sending
the signal to the next device? Ring
Which of the following topologies connects each network device to a central hub? Star
You have implemented an ad-hoc wireless network that doesn't employ a wireless access point.
Every wireless network card can communicate directly with any other wireless network card on
the network.
,TestOut Network Pro Ch 1 and 2 (1.1.5, 1.2.3,
1.3.6, 1.4.4, 1.5.5, 1.6.3, 2.1.4, 2.2.4, 2.3.4,
2.4.8, 2.5.7 Questions With Solutions 100%
Solved
What type of physical network topology has been implemented in this type of network?
Mesh
You have been asked to implement a network infrastructure that will accommodate failed
connections. Which of the following network topologies provides redundancy for a failed link?
Mesh
You want to implement a fault tolerant topology as you interconnect routers on your wide area
netowrk. Which of the following would meet your needs? Mesh
What device is used to create a physical star topology? Switch or hub
You have a small network that uses a hub to connect multiple devices. What physical topology is
used? Star
, TestOut Network Pro Ch 1 and 2 (1.1.5, 1.2.3,
1.3.6, 1.4.4, 1.5.5, 1.6.3, 2.1.4, 2.2.4, 2.3.4,
2.4.8, 2.5.7 Questions With Solutions 100%
Solved
You have been asked to implement a wired network infrastracture that will accommodate fialed
conenctions. You don't have a large budget, so you decide to provide redundancy for only a
handful of critical devices.
Which of the following netowork topologies should you implement? Partial Mesh
Which two of the following are included as part of the Data Link Layer? -Identifying
physical network device
-Controlling how messages are propagated through the network
In the OSI Model, what is the primary function of the Network Layer? Routes messages
between networks
In the OSI Model, which of the following functions are performed at the Presentation Layer?
-Specify data format
1.3.6, 1.4.4, 1.5.5, 1.6.3, 2.1.4, 2.2.4, 2.3.4,
2.4.8, 2.5.7 Questions With Solutions 100%
Solved
Which of the following topologies connects all devices to a trunk cable? Bus
Which of the following topologies connects each device to a neighboring device? Ring
In which of the following topolgies does each device on the netowrk act as a repeater, sending
the signal to the next device? Ring
Which of the following topologies connects each network device to a central hub? Star
You have implemented an ad-hoc wireless network that doesn't employ a wireless access point.
Every wireless network card can communicate directly with any other wireless network card on
the network.
,TestOut Network Pro Ch 1 and 2 (1.1.5, 1.2.3,
1.3.6, 1.4.4, 1.5.5, 1.6.3, 2.1.4, 2.2.4, 2.3.4,
2.4.8, 2.5.7 Questions With Solutions 100%
Solved
What type of physical network topology has been implemented in this type of network?
Mesh
You have been asked to implement a network infrastructure that will accommodate failed
connections. Which of the following network topologies provides redundancy for a failed link?
Mesh
You want to implement a fault tolerant topology as you interconnect routers on your wide area
netowrk. Which of the following would meet your needs? Mesh
What device is used to create a physical star topology? Switch or hub
You have a small network that uses a hub to connect multiple devices. What physical topology is
used? Star
, TestOut Network Pro Ch 1 and 2 (1.1.5, 1.2.3,
1.3.6, 1.4.4, 1.5.5, 1.6.3, 2.1.4, 2.2.4, 2.3.4,
2.4.8, 2.5.7 Questions With Solutions 100%
Solved
You have been asked to implement a wired network infrastracture that will accommodate fialed
conenctions. You don't have a large budget, so you decide to provide redundancy for only a
handful of critical devices.
Which of the following netowork topologies should you implement? Partial Mesh
Which two of the following are included as part of the Data Link Layer? -Identifying
physical network device
-Controlling how messages are propagated through the network
In the OSI Model, what is the primary function of the Network Layer? Routes messages
between networks
In the OSI Model, which of the following functions are performed at the Presentation Layer?
-Specify data format
