TestOut PC Pro Certification Practice Exam
Questions With Solutions 100% Solved
You are the IT administrator for a small corporate network. You are configuring Windows
Update on the Office2 workstation in Office 2.
In this lab, your task is to complete the following:
- Set the active hours of the workstation to 6:00 a.m. to 11:00 p.m.
- Configure Windows Update to install updates semi-annually.
- Allow other Microsoft products to update when I update Windows.
- Defer the update to 90 days.
- Set security improvements to 0 days.
- Set Pause Updates to Off. Complete this lab as follows:
Right-click Start and select Settings.
Maximize the window for easier viewing.
Select Update & security.
Under Update Settings, select Change active hours.
Set the Start time to 6:00 a.m.
, TestOut PC Pro Certification Practice Exam
Questions With Solutions 100% Solved
Select the check mark.
Set the End time to 11:00 p.m.
Select the check mark.
Select Save.
Select Advanced options.
Select Give me updates for other Microsoft products when I update Windows.
From the Choose when updates are installed drop-down list, select Semi-Annual Channel.
From the deferred update drop-down list, select 90.
From the deferred security improvements drop-down list, select 0.
Set Pause Updates to Off.
You work at a computer repair store. You're building a computer. You just installed four 8-GB
memory modules for a total of 32 GB of memory (32,768 MB). When you try to boot the
computer, the screen is blank, and the computer beeps several times.
In this lab, your task is to diagnose and correct the problem as follows:
, TestOut PC Pro Certification Practice Exam
Questions With Solutions 100% Solved
Identify which memory modules are not working.
Use the memory tester to identify working and non-working modules.
Install 32 GB of working modules.
Use spares from the Shelf if necessary.
Place any non-working memory modules on the Shelf.
After you install the memory, boot into the BIOS setup and verify that the correct amount of
memory is detected. Test the memory modules in the computer as follows:
Above the computer, select Motherboard to switch to the motherboard view of the computer.
On the Shelf, expand PC Tools.
Drag the Memory Tester from the Shelf to the Workspace.
Drag a memory module from the computer to the correct slot on the memory tester.
Select Test.
If the memory tester indicates BAD or ERROR, the module is bad. Drag the module to the Shelf.
If the memory tester indicates OK, the module is good. Return the module to the computer.
Repeat steps 1d-1e for all memory modules in the computer.
Test and install the memory modules on the Shelf as follows:
, TestOut PC Pro Certification Practice Exam
Questions With Solutions 100% Solved
On the Shelf, expand Memory Modules.
Drag a memory module from the Shelf to the correct slot on the memory tester.
Select Test.
If the memory tester indicates BAD or ERROR, the module is bad; return the module to the
Shelf.
If the memory tester indicates OK, the module is good; drag the module to the computer.
Repeat steps 2b-2c until all memory slots in the computer are filled with good modules.
Boot into the BIOS and verify that all installed modules are recognized by the BIOS as follows:
Above the computer, select Front to switch to the front view of the computer.
On the computer, select the power button on the front of the computer.
When the BIOS loading window appears, press F2 to enter the BIOS.
You are the IT administrator for a small corporate network. You need to configure the laptop
computer in the Lobby to use the corporate proxy server. The proxy server is used to control
access to the internet.
In this lab, your task is to configure the proxy server settings as follows:
Questions With Solutions 100% Solved
You are the IT administrator for a small corporate network. You are configuring Windows
Update on the Office2 workstation in Office 2.
In this lab, your task is to complete the following:
- Set the active hours of the workstation to 6:00 a.m. to 11:00 p.m.
- Configure Windows Update to install updates semi-annually.
- Allow other Microsoft products to update when I update Windows.
- Defer the update to 90 days.
- Set security improvements to 0 days.
- Set Pause Updates to Off. Complete this lab as follows:
Right-click Start and select Settings.
Maximize the window for easier viewing.
Select Update & security.
Under Update Settings, select Change active hours.
Set the Start time to 6:00 a.m.
, TestOut PC Pro Certification Practice Exam
Questions With Solutions 100% Solved
Select the check mark.
Set the End time to 11:00 p.m.
Select the check mark.
Select Save.
Select Advanced options.
Select Give me updates for other Microsoft products when I update Windows.
From the Choose when updates are installed drop-down list, select Semi-Annual Channel.
From the deferred update drop-down list, select 90.
From the deferred security improvements drop-down list, select 0.
Set Pause Updates to Off.
You work at a computer repair store. You're building a computer. You just installed four 8-GB
memory modules for a total of 32 GB of memory (32,768 MB). When you try to boot the
computer, the screen is blank, and the computer beeps several times.
In this lab, your task is to diagnose and correct the problem as follows:
, TestOut PC Pro Certification Practice Exam
Questions With Solutions 100% Solved
Identify which memory modules are not working.
Use the memory tester to identify working and non-working modules.
Install 32 GB of working modules.
Use spares from the Shelf if necessary.
Place any non-working memory modules on the Shelf.
After you install the memory, boot into the BIOS setup and verify that the correct amount of
memory is detected. Test the memory modules in the computer as follows:
Above the computer, select Motherboard to switch to the motherboard view of the computer.
On the Shelf, expand PC Tools.
Drag the Memory Tester from the Shelf to the Workspace.
Drag a memory module from the computer to the correct slot on the memory tester.
Select Test.
If the memory tester indicates BAD or ERROR, the module is bad. Drag the module to the Shelf.
If the memory tester indicates OK, the module is good. Return the module to the computer.
Repeat steps 1d-1e for all memory modules in the computer.
Test and install the memory modules on the Shelf as follows:
, TestOut PC Pro Certification Practice Exam
Questions With Solutions 100% Solved
On the Shelf, expand Memory Modules.
Drag a memory module from the Shelf to the correct slot on the memory tester.
Select Test.
If the memory tester indicates BAD or ERROR, the module is bad; return the module to the
Shelf.
If the memory tester indicates OK, the module is good; drag the module to the computer.
Repeat steps 2b-2c until all memory slots in the computer are filled with good modules.
Boot into the BIOS and verify that all installed modules are recognized by the BIOS as follows:
Above the computer, select Front to switch to the front view of the computer.
On the computer, select the power button on the front of the computer.
When the BIOS loading window appears, press F2 to enter the BIOS.
You are the IT administrator for a small corporate network. You need to configure the laptop
computer in the Lobby to use the corporate proxy server. The proxy server is used to control
access to the internet.
In this lab, your task is to configure the proxy server settings as follows:
