1 | P a g e | © copyright 2024/2025 | Grade A+
SDI Ftt 211-7477 Questions and
Answers | Latest Update 2024/2025
Why is the lathe turning process the most involved?
✓ ~~> It involves the greatest investment of tooling.
The proper temperature suggested for the browning process was 150°: 200°,
but the best way to tell if it is hot enough is if the solution readily evaporates.
✓ ~~> True
T/F: The lathe turning process is the most involved process because it involves
the greatest investment of tooling.
✓ ~~> True
T/F: The shape of the muzzle is critical primarily for aesthetic reasons.
✓ ~~> False
What is the purpose of a 320-grit?
✓ ~~> It is a cutting grit, to finely smooth wood and fill pores.
T/F: The very last step in the process of gunstock finishing is a light spraying.
✓ ~~> True
Master01 | September, 2024/2025 | Latest update
, 2 | P a g e | © copyright 2024/2025 | Grade A+
T/F: The lathe method is capable of cutting any shape of muzzle crown with a
limited number variations of the standard shapes.
✓ ~~> False
Once finish has been applied to gunstock, it needs to cure. What is the
recommended length of time for curing the gunstock?
✓ ~~> The finish should cure for several days.
T/F: The use of sanding blocks to back your paper is essential during the
finishing process of gunstock is recommended.
✓ ~~> True
T/F: Recutting or reshaping the muzzle of an older or damaged firearm should
only be done with a lathe as it is the most accurate.
✓ ~~> False
How long should stain sit, at a minimum, before you apply the finish?
✓ ~~> It should sit overnight at a minimum.
What is the primary downside of using the lathe turning process?
✓ ~~> The initial investment.
The most popular muzzle shapes are:
Master01 | September, 2024/2025 | Latest update
SDI Ftt 211-7477 Questions and
Answers | Latest Update 2024/2025
Why is the lathe turning process the most involved?
✓ ~~> It involves the greatest investment of tooling.
The proper temperature suggested for the browning process was 150°: 200°,
but the best way to tell if it is hot enough is if the solution readily evaporates.
✓ ~~> True
T/F: The lathe turning process is the most involved process because it involves
the greatest investment of tooling.
✓ ~~> True
T/F: The shape of the muzzle is critical primarily for aesthetic reasons.
✓ ~~> False
What is the purpose of a 320-grit?
✓ ~~> It is a cutting grit, to finely smooth wood and fill pores.
T/F: The very last step in the process of gunstock finishing is a light spraying.
✓ ~~> True
Master01 | September, 2024/2025 | Latest update
, 2 | P a g e | © copyright 2024/2025 | Grade A+
T/F: The lathe method is capable of cutting any shape of muzzle crown with a
limited number variations of the standard shapes.
✓ ~~> False
Once finish has been applied to gunstock, it needs to cure. What is the
recommended length of time for curing the gunstock?
✓ ~~> The finish should cure for several days.
T/F: The use of sanding blocks to back your paper is essential during the
finishing process of gunstock is recommended.
✓ ~~> True
T/F: Recutting or reshaping the muzzle of an older or damaged firearm should
only be done with a lathe as it is the most accurate.
✓ ~~> False
How long should stain sit, at a minimum, before you apply the finish?
✓ ~~> It should sit overnight at a minimum.
What is the primary downside of using the lathe turning process?
✓ ~~> The initial investment.
The most popular muzzle shapes are:
Master01 | September, 2024/2025 | Latest update
