SDI Gunsmithing Tools Lab (FTT 104) Questions and Answers New (2024/2025) Solved 100% Correct

Once the field stripping procedure for pump-action shotguns has been completed, you can examine the parts for any wear or damage. The most critical areas to be checked are the Barrel, Action, FCG, Feeding Device, and which of the following: - ️️Furniture Which tools are designed to cut deep and remove material rapidly, are known as gouges and feature arched leading edges, which dig into the workpiece? - ️️Chisel Which hammer is usually reserved for smaller jobs, driving smaller pins that require less force? - ️️Brass Hammer When cleaning a firearm, the second step in the process is which of the following: - ️️With repeating and semi-automatic firearms, remove the feed source. Another basic hand tool, similar to a pair of locking pliers with a needle nose, is called which of the following: - ️️Hemostat A basic hand tool used in firearms repairs is the pliers. The most common types are Combination, Slip Joint, Needle-Nose, Vise Grip, and which of the following: - ️️Channellock Another basic Preparation for disassembly is threefold: Preparation of the Firearm, Preparation of Your Workspace and Tools, and which of the following: - ️️Mental Preparation hand tool used is the punch. A punch is used to drive pins which are found on firearms. The types of punches include; starter punch, pin punch, center punch, drift punch, and which of the following: - ️️Roll Pin Punch Which hammer is the workhorse of all the different hammers, capable of handling any project, large or small? - ️️Ball-Peen Hammer Which of the following wrenches offers the user a greater range of usability, but is also more likely to strip a bolt head than a traditional wrench of the correct size? - ️️Adjustable WrenchT/F: The two basic types of screwdrivers are flat head and Phillips-head. These screwdrivers can be used interchangeably with different types of screws. - ️️FALSE T/F: Hammers are composed of metal and are typically used on non-metal, while mallets are made of plastic or wood and are used on metals. - ️️FALSE