,TMS3733 Assignment 5 (COMPLETE ANSWERS)
2024 - DUE September 2024 ; 100% TRUSTED
Complete, trusted solutions and explanations.
QUESTION 1 The design process step 3 is referred to as the
make stage. It is important to plan for this stage. Planning
includes those activities which are involved when working out,
in advance, how a product, process or system is to be produced
or realised before actually doing it. Make notes regarding the
materials needed by finding answers to the following questions:
a. What different types of material are needed? (2) b. What
should the quality of the different materials be? (2) c. What are
the sizes of the available raw materials? (3) d. Will the different
materials have to be cut to size? (5) e. Will the different
materials have to be shaped? (5) f. What does the final finish of
the product or prototype have to be? (3) [20]
Make Stage Planning
a. What different types of material are needed?
Various types of materials will depend on the specific
product, process, or system, but commonly used materials
include:
1. Metals (e.g., steel, aluminum)
2. Non-metals (e.g., plastics, wood, fabric)
b. What should the quality of the different materials be?
, The quality of materials should meet the specific
requirements of the project:
1. Durability: Materials should be strong enough to
withstand the intended usage.
2. Precision: High-quality materials should have
consistent dimensions and properties.
c. What are the sizes of the available raw materials?
Raw materials come in various sizes:
1. Sheets: Standard metal or plastic sheets (e.g., 1m x
2m)
2. Rods or Pipes: Length and diameter will vary based
on the project.
3. Blocks or Panels: For wood or other materials,
available in thicknesses like 1 inch, 2 inches, etc.
d. Will the different materials have to be cut to size?
Yes, most materials need to be cut to meet the project’s
dimensions:
1. Sheets: May require cutting into smaller sections.
2. Rods/Pipes: Need to be cut to specific lengths.
3. Panels: Depending on the design, panels may need
resizing.
e. Will the different materials have to be shaped?
2024 - DUE September 2024 ; 100% TRUSTED
Complete, trusted solutions and explanations.
QUESTION 1 The design process step 3 is referred to as the
make stage. It is important to plan for this stage. Planning
includes those activities which are involved when working out,
in advance, how a product, process or system is to be produced
or realised before actually doing it. Make notes regarding the
materials needed by finding answers to the following questions:
a. What different types of material are needed? (2) b. What
should the quality of the different materials be? (2) c. What are
the sizes of the available raw materials? (3) d. Will the different
materials have to be cut to size? (5) e. Will the different
materials have to be shaped? (5) f. What does the final finish of
the product or prototype have to be? (3) [20]
Make Stage Planning
a. What different types of material are needed?
Various types of materials will depend on the specific
product, process, or system, but commonly used materials
include:
1. Metals (e.g., steel, aluminum)
2. Non-metals (e.g., plastics, wood, fabric)
b. What should the quality of the different materials be?
, The quality of materials should meet the specific
requirements of the project:
1. Durability: Materials should be strong enough to
withstand the intended usage.
2. Precision: High-quality materials should have
consistent dimensions and properties.
c. What are the sizes of the available raw materials?
Raw materials come in various sizes:
1. Sheets: Standard metal or plastic sheets (e.g., 1m x
2m)
2. Rods or Pipes: Length and diameter will vary based
on the project.
3. Blocks or Panels: For wood or other materials,
available in thicknesses like 1 inch, 2 inches, etc.
d. Will the different materials have to be cut to size?
Yes, most materials need to be cut to meet the project’s
dimensions:
1. Sheets: May require cutting into smaller sections.
2. Rods/Pipes: Need to be cut to specific lengths.
3. Panels: Depending on the design, panels may need
resizing.
e. Will the different materials have to be shaped?
