Iicrc Wrt Test, With 91 Questions & Answers 2024 ( A+
Graded 100% Verifid)
1. A first priority on every water loss is to conduct a: Hazard and risk assessment
2. All technicians required to wear respiratory protection must be:: Trained, Fitted
for mask and evaluated medically.
3. Two hazardous materials commonly found in older structures are: Lead and
Asbestos
4. Water damage restoration work never begins without a signed: work authorization
5. To minimize damage to building materials and contents, restorers should
perform _______________________________________ as part of the preliminary
inspection.: Loss mitigation services
6. When pre-existing damage is discovered, technicians should
___________________ and ____________________ to all materially interested
parties.: document and communicate
7. Technicians should always use a _______________________ and a
_______________________ to disengage carpet from the tackless strip.: knee kicked
and carpet awl
8. The primary reasons for carpet delimitations are:: Damage due to water
Folding of wet carpet during pad removal
Over aggressive extraction
Dragging heavy items
Alot of foot traffic
Improper
install
Pet urine
9. Secondary damage is most prevalent in ___________________ materials.:
Hygroscopic
10. Above __________% RH supports microbial growth and secondary damage
can occur in hygroscopic materials.: 60%
11. Category _____ water originated from a sanitary source and does not pose
substantial risk to humans.: 1
12. Category ____ water contains significant contamination and has the potential
to cause discomfort or sickness if contacted or consumed by humans-
:2
13. In a Category 3 water intrusion with elevated risk situations, restorers should
consider using an ______________________________________ to assist in a
remediation assessment.: Indoor environmental Professional (IEP)
1/6
, 14. When working contaminated environments technicians should erect
________________________, done appropriate __________, and install
______________________.: Containment, PPE, Air filtration device (AFD)
15 When working in a CAT 3 water loss the PPE should consist of:: All of it:
full face
respiratory mask
protective suit
waterproof
gloves water
proof boots
16. If at any time during the remediation of a cat 3 loss, any materially interested
party disagrees with how the remediation processes will be performed, restorers
should ____________ immediately until the conflict is resolved.: STOP
17. Which property of a material more relates to water vapor passing through or out
of it?: Permeance
18. In order to effectively dry wood subfloor beneath vinyl floor, restorers should
remove the ____________________: vinyl floor
19. When cellulosic insulation gets wet it should be __________: removed
20. Gypsum board that is saturated and sagging should safely ___________ and
_________.: Drained and removed
21. When inspecting a water damaged structure, techs should inspect all
___________________ areas: potentially affected
22. Class ___ water losses contain the least amount of water absorption and
evaporation load where wet, porous materials represent less than 5% of the
combined floor, wall and ceiling surface area in the space: 1
23. Class ____ water losses contain a significant amount of water absorption and
evaporation load where wet, porous materials represent 5%-40% of the
combined, floor, wall and ceiling surface area in the space: 2
24. The greatest amount of water absorption and evaporation load where wet,
porous materials represent more than 40% of the combined wall, floor, and
ceiling surface areas and where low evaporation materials or assemblies have
absorbed minimal moisture is a Class___________: 3
25. Water intrusion that involves a significant amount of water absorption bound
within low evaporation materials and may require longer drying times is a class
____: 4
26. moisture detection equipment should be used to measure and document
___________________ and _______________________________.: Moisture
content and relative humidity readings.
2/6
Graded 100% Verifid)
1. A first priority on every water loss is to conduct a: Hazard and risk assessment
2. All technicians required to wear respiratory protection must be:: Trained, Fitted
for mask and evaluated medically.
3. Two hazardous materials commonly found in older structures are: Lead and
Asbestos
4. Water damage restoration work never begins without a signed: work authorization
5. To minimize damage to building materials and contents, restorers should
perform _______________________________________ as part of the preliminary
inspection.: Loss mitigation services
6. When pre-existing damage is discovered, technicians should
___________________ and ____________________ to all materially interested
parties.: document and communicate
7. Technicians should always use a _______________________ and a
_______________________ to disengage carpet from the tackless strip.: knee kicked
and carpet awl
8. The primary reasons for carpet delimitations are:: Damage due to water
Folding of wet carpet during pad removal
Over aggressive extraction
Dragging heavy items
Alot of foot traffic
Improper
install
Pet urine
9. Secondary damage is most prevalent in ___________________ materials.:
Hygroscopic
10. Above __________% RH supports microbial growth and secondary damage
can occur in hygroscopic materials.: 60%
11. Category _____ water originated from a sanitary source and does not pose
substantial risk to humans.: 1
12. Category ____ water contains significant contamination and has the potential
to cause discomfort or sickness if contacted or consumed by humans-
:2
13. In a Category 3 water intrusion with elevated risk situations, restorers should
consider using an ______________________________________ to assist in a
remediation assessment.: Indoor environmental Professional (IEP)
1/6
, 14. When working contaminated environments technicians should erect
________________________, done appropriate __________, and install
______________________.: Containment, PPE, Air filtration device (AFD)
15 When working in a CAT 3 water loss the PPE should consist of:: All of it:
full face
respiratory mask
protective suit
waterproof
gloves water
proof boots
16. If at any time during the remediation of a cat 3 loss, any materially interested
party disagrees with how the remediation processes will be performed, restorers
should ____________ immediately until the conflict is resolved.: STOP
17. Which property of a material more relates to water vapor passing through or out
of it?: Permeance
18. In order to effectively dry wood subfloor beneath vinyl floor, restorers should
remove the ____________________: vinyl floor
19. When cellulosic insulation gets wet it should be __________: removed
20. Gypsum board that is saturated and sagging should safely ___________ and
_________.: Drained and removed
21. When inspecting a water damaged structure, techs should inspect all
___________________ areas: potentially affected
22. Class ___ water losses contain the least amount of water absorption and
evaporation load where wet, porous materials represent less than 5% of the
combined floor, wall and ceiling surface area in the space: 1
23. Class ____ water losses contain a significant amount of water absorption and
evaporation load where wet, porous materials represent 5%-40% of the
combined, floor, wall and ceiling surface area in the space: 2
24. The greatest amount of water absorption and evaporation load where wet,
porous materials represent more than 40% of the combined wall, floor, and
ceiling surface areas and where low evaporation materials or assemblies have
absorbed minimal moisture is a Class___________: 3
25. Water intrusion that involves a significant amount of water absorption bound
within low evaporation materials and may require longer drying times is a class
____: 4
26. moisture detection equipment should be used to measure and document
___________________ and _______________________________.: Moisture
content and relative humidity readings.
2/6
