©PREP4EXAMS2024/2025 REAL EXAMS DUMP Wednesday, August 7, 2024 9,33 PM
HIC Exam Practice Questions and Answers (100% Pass)
Nailing into hard wood, whats best to use ? - Answer✔️✔️-Cut na
To avoid hardening due to hydration ....use masonry mo before? - Answer✔️✔️-2
1/2 Hours
Heat flows in what direction ? - Answer✔️✔️-Hot to Cold
First and most important step in using or preparing a material ? - Answer✔️✔️-
Thoroughly read and understand the manufactures directions .
whats true abou the gypsum broads over wood framing ? - Answer✔️✔️-Apply First
to ceiling , then to wall
What is used to remove air pockets from place concrete ? - Answer✔️✔️-Vibration
wide square-edged boards are to be used for broad and batt siding . how should the
batten strips be nailed ? - Answer✔️✔️-to the furring strips between the boards .
what can be installed on a vertical wall to accept viny soppit panels ? -
Answer✔️✔️-F-Channel
a vapor retarder on blanket insulation - Answer✔️✔️-Face the warm side of wall
when installing shoe molding on a base board over hand wood floor , the shoe
mold should be ? - Answer✔️✔️-nailed only to the base board
1
HIC Exam Practice Questions and Answers (100% Pass)
Nailing into hard wood, whats best to use ? - Answer✔️✔️-Cut na
To avoid hardening due to hydration ....use masonry mo before? - Answer✔️✔️-2
1/2 Hours
Heat flows in what direction ? - Answer✔️✔️-Hot to Cold
First and most important step in using or preparing a material ? - Answer✔️✔️-
Thoroughly read and understand the manufactures directions .
whats true abou the gypsum broads over wood framing ? - Answer✔️✔️-Apply First
to ceiling , then to wall
What is used to remove air pockets from place concrete ? - Answer✔️✔️-Vibration
wide square-edged boards are to be used for broad and batt siding . how should the
batten strips be nailed ? - Answer✔️✔️-to the furring strips between the boards .
what can be installed on a vertical wall to accept viny soppit panels ? -
Answer✔️✔️-F-Channel
a vapor retarder on blanket insulation - Answer✔️✔️-Face the warm side of wall
when installing shoe molding on a base board over hand wood floor , the shoe
mold should be ? - Answer✔️✔️-nailed only to the base board
1
