MODULE 00101 EXAM NCCER
QUESTIONS WITH COMPLETE
ANSWERS
Poor lighting, excessive noise, and inadequate guards for moving parts are example of -
Answer-Unsafe conditions
Companies with strong safety cultures have lower - Answer-Turnover
AN unplanned event that may or may not result in property damage is known as a(n) -
Answer-Incident
The activity that consists of breaking a job into it's components tasks and the analyzing
each step for potential hazards is called a - Answer-job safety analysis
A measure of the probability, consequences, and exposure related to an event is
referred to as - Answer-Risk
What percentage of all accidental deaths in the construction industry are caused by
slips,trips,and falls on walking and working surfaces - Answer-15%
The D-ring or support point on a safety harness should be placed - Answer-between the
shoulder blades
Lanyards that have no shock-absorbing features are used for _____. - Answer-
Positioning
the highest safety standing level on an extension ladder is the - Answer-fourth rung from
the top
When standing on a scaffold, it is important to confirm that - Answer-the wheel brakes
on the scaffold are locked in place
When stacking materials such as bricks or block, do not stack materials beyond a
_____. - Answer-4:1 height-to-base ratio
Benching systems are prohibited in _____. - Answer-Type C soils
In the absence of other information, all soil in an excavation should be treated as if it is -
Answer-Type C
Daily Inspection of an excavation must be performed by a(n) - Answer-Competent
person
QUESTIONS WITH COMPLETE
ANSWERS
Poor lighting, excessive noise, and inadequate guards for moving parts are example of -
Answer-Unsafe conditions
Companies with strong safety cultures have lower - Answer-Turnover
AN unplanned event that may or may not result in property damage is known as a(n) -
Answer-Incident
The activity that consists of breaking a job into it's components tasks and the analyzing
each step for potential hazards is called a - Answer-job safety analysis
A measure of the probability, consequences, and exposure related to an event is
referred to as - Answer-Risk
What percentage of all accidental deaths in the construction industry are caused by
slips,trips,and falls on walking and working surfaces - Answer-15%
The D-ring or support point on a safety harness should be placed - Answer-between the
shoulder blades
Lanyards that have no shock-absorbing features are used for _____. - Answer-
Positioning
the highest safety standing level on an extension ladder is the - Answer-fourth rung from
the top
When standing on a scaffold, it is important to confirm that - Answer-the wheel brakes
on the scaffold are locked in place
When stacking materials such as bricks or block, do not stack materials beyond a
_____. - Answer-4:1 height-to-base ratio
Benching systems are prohibited in _____. - Answer-Type C soils
In the absence of other information, all soil in an excavation should be treated as if it is -
Answer-Type C
Daily Inspection of an excavation must be performed by a(n) - Answer-Competent
person
