TTT1; Questions and Answers 100% Correct
What are the three main components that make up a fall arrest system?
Correct Answer-Anchorage, Full body harness, and Attachments
Who is responsible for ensuring the General Duty Clause when OSHA has not yet
publicized the specific regulations? Correct Answer-Employer
When should safety glasses be worn? Correct Answer-When grinding steel
Monopole components are identified as: Correct Answer-Base Flange
The following term is used to describe rules written by the Department of Labor:
Correct Answer-Regulations
Which government organization regulates tower lighting? Correct Answer-
FAA
What does the person operating the Capstan need a clear view of? Correct
Answer-The load and signal person
, TTT1; Questions and Answers 100% Correct
T/F: You should use a carabiner when lifting loads? Correct Answer-False
The four most common types of structures used to support antennas are:
Correct Answer-Self-Supporting, Monopoles, Guyed, and Non-Standard
T/F: All antennas should be considered active? Correct Answer-True
The following piece of equipment can be used to power an electric Capstan
when an electrical outlet is not available: Correct Answer-Generator
What is the heel block used for? Correct Answer-To change the direction of
the load, jump or tag line from horizontal to vertical
The vehicle mounted capstan should be moved as close as possible to the
__________ once the lifting path is determined. Correct Answer-Lifting
staging area
T/F: A safe practice is to stay 6 feet or more away from an active antenna
Correct Answer-True
, TTT1; Questions and Answers 100% Correct
What is the most common power source used with a Capstan Hoist? Correct
Answer-Electrical power
When using an extension ladder, how many feet past the platform must the
ladder extend? Correct Answer-3 feet
A Capstan hoist should be inspected __________ before use? Correct
Answer-Daily
A vertical life line should have a minimum breaking strength of how many
pounds? Correct Answer-5,000 lbs
What do the letters LOTO stand for? Correct Answer-Lockout Tagout
T/F: Due to the resonance frequency and the high power of broadcast antennas,
overexposure is almost always a problem. Correct Answer-True
What are the three main components that make up a fall arrest system?
Correct Answer-Anchorage, Full body harness, and Attachments
Who is responsible for ensuring the General Duty Clause when OSHA has not yet
publicized the specific regulations? Correct Answer-Employer
When should safety glasses be worn? Correct Answer-When grinding steel
Monopole components are identified as: Correct Answer-Base Flange
The following term is used to describe rules written by the Department of Labor:
Correct Answer-Regulations
Which government organization regulates tower lighting? Correct Answer-
FAA
What does the person operating the Capstan need a clear view of? Correct
Answer-The load and signal person
, TTT1; Questions and Answers 100% Correct
T/F: You should use a carabiner when lifting loads? Correct Answer-False
The four most common types of structures used to support antennas are:
Correct Answer-Self-Supporting, Monopoles, Guyed, and Non-Standard
T/F: All antennas should be considered active? Correct Answer-True
The following piece of equipment can be used to power an electric Capstan
when an electrical outlet is not available: Correct Answer-Generator
What is the heel block used for? Correct Answer-To change the direction of
the load, jump or tag line from horizontal to vertical
The vehicle mounted capstan should be moved as close as possible to the
__________ once the lifting path is determined. Correct Answer-Lifting
staging area
T/F: A safe practice is to stay 6 feet or more away from an active antenna
Correct Answer-True
, TTT1; Questions and Answers 100% Correct
What is the most common power source used with a Capstan Hoist? Correct
Answer-Electrical power
When using an extension ladder, how many feet past the platform must the
ladder extend? Correct Answer-3 feet
A Capstan hoist should be inspected __________ before use? Correct
Answer-Daily
A vertical life line should have a minimum breaking strength of how many
pounds? Correct Answer-5,000 lbs
What do the letters LOTO stand for? Correct Answer-Lockout Tagout
T/F: Due to the resonance frequency and the high power of broadcast antennas,
overexposure is almost always a problem. Correct Answer-True
