Pneumatics Study Guide- Final Questions With Verified Solutions

Pneumatics Study Guide- Final Questions With Verified Solutions The most commonly used fluid for transmitting power in pneumatic systems is _____. Air The component responsible for converting power in a pneumatic setup is known as the _____. Actuator Pressure measures the intensity of _____. Force The highest pressure indicated on a gauge is referred to as the gauge's _____. Range The apparatus used to filter and clean air is called an _____. Air Filter 2 A pressure regulator's function is to _____ the pressure downstream. Control To lower the regulated pressure, turn the adjustment knob on the regulator _____. Counterclockwise (CCW) To eliminate water from the filter, engage the _____. Drain If a regulator has a _____ feature, its outlet pressure will decrease automatically as the pressure is reduced. Self Bleed The _____ within the filter causes the air to swirl, pushing heavier particles against the sides of the bowl. Deflector When air flows freely out of an open hose end, it may cause the hose to _____. 3 Whip One drawback of compressed air is the relatively low _____ levels resulting from the pressures involved. Force _____ fittings enable quick and straightforward assembly and disassembly of circuits. Quick Connect A fitting designed to connect three branch circuits to a supply is termed a _____. Cross A _____ allows for the connection of two branch