NACE CIP Level 2 Exam
Terms in this set (34)
Describe what the Rust that is loosely adherent, easily comes of, & leaves
characteristics of a heavy significant marks on a cloth that is lightly wiped over the
flash rusted surface are. 7-5 surface.
Describe what the Rust that is reasonably well adherent and leaves light
characteristics of a marks on a cloth that is lightly wiped over the surface.
moderate flash rusted
surface are. 7-5
Describe what the Rust that is tightly adherent & not easily removed by
characteristics of a light lightly wiping with a cloth.
flash rusted surface are. 7-5
At what psig is low-pressure below 5000 psig
cleaning preformed at? 7-2
At what psig is high- 5000-10,000 psig
pressure cleaning
preformed at? 7-2
At what psig is high- 10,000-30,000 psig
pressure waterjetting
preformed at? 7-2
At what psig is ultrahigh- above 30,000 psig
pressure waterjetting
preformed at 7-2
What does waterjetting not An anchor profile
create? 7-1
In the marine industry, Removal of marine growth, depleted antifouling coatings
waterjetting is widely used and surface preparation of tank/hold interiors
for what purposes? 7-1
Terms in this set (34)
Describe what the Rust that is loosely adherent, easily comes of, & leaves
characteristics of a heavy significant marks on a cloth that is lightly wiped over the
flash rusted surface are. 7-5 surface.
Describe what the Rust that is reasonably well adherent and leaves light
characteristics of a marks on a cloth that is lightly wiped over the surface.
moderate flash rusted
surface are. 7-5
Describe what the Rust that is tightly adherent & not easily removed by
characteristics of a light lightly wiping with a cloth.
flash rusted surface are. 7-5
At what psig is low-pressure below 5000 psig
cleaning preformed at? 7-2
At what psig is high- 5000-10,000 psig
pressure cleaning
preformed at? 7-2
At what psig is high- 10,000-30,000 psig
pressure waterjetting
preformed at? 7-2
At what psig is ultrahigh- above 30,000 psig
pressure waterjetting
preformed at 7-2
What does waterjetting not An anchor profile
create? 7-1
In the marine industry, Removal of marine growth, depleted antifouling coatings
waterjetting is widely used and surface preparation of tank/hold interiors
for what purposes? 7-1
