Suspension & Steering Exam Questions With Verified Solutions.

Suspension & Steering Exam Questions With Verified Solutions. Bleeding a power steering unit is generally done by - answerturning the steering wheel left and right repeatedly After rounding a turn, the front wheels do not return to the straight ahead position in a normal way. What adjustment is most likely to be out of specifications? - answerCaster "Toe" adjustment on front wheel drive vehicles is made by: - answerchanging he length of the steering linkage When performing a front-end alignment what should you do before you adjust the toe setting? - answeradjust the caster & camber Front-wheel toe-in adjustment on rear-wheel drive vehicles is made by: - answerchanging the length of the steering linkage A mechanic is going to adjust the curb height on a car with torsion bars. To do this the car should be checked: - answeron a level surface with the car at curb weight A proper way to check ball joints for wear is by: - answervisual observation of the wear indicator & unloading the ball joint and using a pry bar and a dial indicator which of the following adjustments can be made on all vehicles with MacPherson strut suspensions? - answerToe settings You are checking the war on ball joints with a dial indicator at the wheel rim. What must you do to get accurate readings? - answercheck the wheel bearing adjustment and correct if needed A mechanic jacks up a car, stands facing it, places a hand on the front of each tire. The mechanic pushes out and then pulls in on both tires. Too much movement would most likely mean that: - answerthe tie rod ends are worn Which of the following should be checked first thing when doing a front-end alignment? - answerCurb height To counteract road crown, most manufacturers recommend that the left front wheel be adjusted to have: - answerLess positive (+) caster than the right If the toe-in is too great, the tread will most likely show: - answerfeathered edges on both front tires