IMAGE ACQUISITION- QA
RADIOGRAPHIC EQUIPMENT PT 2
xray generator
control console
xray tube (accessories & table)
3 major components used as the xray source in conventional radiography:
1) ___________
2) __________
3) __________
xray generators
largest component of radiographic unit
high voltage transformers
rectifiers (timing circuitry, mas/kvp)
xray generators contain _______ & ______
single
three
high frequency
3 types of xray generators:
1) ______ phase
2) _____ phase
3) _________
control (operating) console
second largest component of radiographic unit
7.5 square feet
characteristics for control booth area:
- floor of booth must be at least _________
, 30 inches
characteristics for control booth area:
- fixed equipment switch at least _______ doorway
1.5mm
characteristics for control booth area:
- booth window must be _______ lead equivalent
7 feet
characteristics for control booth area:
- wall facing table must be ______ high & fixed to floor
interlock
characteristics for control booth area:
- if there is a door, must ________
strong base
counterbalanced
immobilization
SID
xray tube support mechanisms must have:
- ________ = holds tube, insulating oil, collimator, etc
- ________ to offset the weight
RADIOGRAPHIC EQUIPMENT PT 2
xray generator
control console
xray tube (accessories & table)
3 major components used as the xray source in conventional radiography:
1) ___________
2) __________
3) __________
xray generators
largest component of radiographic unit
high voltage transformers
rectifiers (timing circuitry, mas/kvp)
xray generators contain _______ & ______
single
three
high frequency
3 types of xray generators:
1) ______ phase
2) _____ phase
3) _________
control (operating) console
second largest component of radiographic unit
7.5 square feet
characteristics for control booth area:
- floor of booth must be at least _________
, 30 inches
characteristics for control booth area:
- fixed equipment switch at least _______ doorway
1.5mm
characteristics for control booth area:
- booth window must be _______ lead equivalent
7 feet
characteristics for control booth area:
- wall facing table must be ______ high & fixed to floor
interlock
characteristics for control booth area:
- if there is a door, must ________
strong base
counterbalanced
immobilization
SID
xray tube support mechanisms must have:
- ________ = holds tube, insulating oil, collimator, etc
- ________ to offset the weight
