AMT PRACTICE 1 EXAM QUESTIONS AND ANSWERS WITH SOLUTIONS 2024

AMT PRACTICE 1 EXAM QUESTIONS AND ANSWERS WI TH SOLUTIONS 2024 Beginning with the moment the specimen is collected and transported to the laboratory, to the analysis itself and the reporting of the results, must be documented by a process known as: a. Chain of custody. b. Quality assessment. c. Calibration. d. Standards. - ANSWER Chain of custody. Describes how close a test result is to the true value. a. Accuracy b. Calibrations c. Precision d. Standard - ANSWER Accuracy What detects any progressive drift of values to one side of the average value for at least 3 days? a. Dispersion b. Trends c. Shift d. Precision - ANSWER Trends The comparison of an instrument measurement or reading to a known physical constant. a. Quality Control b. Accuracy c. Standards d. Calibration - ANSWER Calibration Agents brucellosis, epsilon toxin, food contaminants, glanders, melioidosis, psittacosis, Q fever, and ricin toxin are classified as a. Category A. b. Category B. c. Category C. d. Category D. - ANSWER Category B. What category of bioterrorism agents has the following characteristics? These agents have the third -highest priority and include emerging pathogens that could be engineered for mass dissemination in the future because of availability, ease of production and dissemination? a. Category A b. Category B c. Category C d. Category D - ANSWER Category C Class B fire extinguishers are used for a. Ordinary combustibles. b. Flammable liquids. c. Electric equipment. d. Powdered metal (combustible) material. - ANSWER Flammable liquids. What category of bioterrorism agents has the following characteristics? These agents have the second highest priority and include pathogens that are moderately easy to disseminate, results in moderate morbidity rates and low mortality rates, and require specific enhancements of the CDC's diagnostic capacity and enhanced diseas e surveillance a. Category A b. Category B c. Category C d. Category D - ANSWER Category B Class A fire extinguishers are used for a. Ordinary combustibles. b. Flammable liquids. c. Electric equipment. d. Powdered metal (combustible) material. - ANSWER Ordinary combustibles. All chemical manufacturers and distributors must comply with all of the new provisions in the revised standards by June 1 ______________. a. 2015 b. 2014 c. 2013 d. 2012 - ANSWER 2015 All employees who work with hazardous chemicals will be required to be trained about the new labels and the elements of the Safety Data Sheet (SDS) by December 1 of ___________. a. 2012 b. 2016 c. 2013 d. 2014 - ANSWER 2013 Flammable - ANSWER MEANS: a. Explosive b. Flammable c. Health Hazard d. Corrosive The GHS brings with it a new chemical labeling standard using ____________. a. Pictures of the chemical b. Cartoon characterizations c. Pictograms d. Pictures of the factory - ANSWER Pictograms Corrosive - ANSWER MEANS: a. Explosive b. Flammable c. Health Hazard d. Corrosive The new Safety Data Sheets (SDSs) will require ______ specific sections, ensuring consistency in the presentation of the information. a. 16 b. 10 c. 25