FSVO state Exam |50 Questions with 100% Correct Answers | Updated and Verified

FSVO state Exam |50 Questions with 100% Correct Answers | Updated and Verified The purpose of using a spotter is to - the driver by observing cross traffic the as the area in the blind spot horizontal and vertical openings, the operator must know: To effectively judge the ability of a vehicle to pass through areas of restricted - vehicle dimensions. Which driving skill would not require using a spotter? - Diminishing clearance The distance a vehicle travels from the point where you begin recognizing the hazard until the apparatus comes to a complete stop is called the: - total stopping distance. The confined space turnaround maneuver allows an operator to turn the apparatus degrees - 180 Improper tire pressures may cause - poor handling One method of performing an apparatus/pretrip inspection is the - walk-around method. Before shutdown the apparatus engine temperature should be allowed to stabilize by idling it for minutes. - 3 to 5 Checking for voltage, electrolyte level, and corrosion are all steps in inspecting: - the battery. While traveling in the center lane of a multiple-lane highway on an emergency call, the vehicle in front of you stops. You should: - brake to reduce speed and pass on the left side of the vehicle. The vacuum test requires a reading at the end of 5 minutes with no more than inches of vacuum being lost. - 10 When responding to emergencies, the use of warning devices: - does not allow the driver to disregard other drivers. When approaching unguarded railroad crossings, the driver shall: - come to a complete stop. Level I staging may be: - used in the initial response to a fire or other incident involving more than one responding company.