CWB Welding Inspector Exam Questions and
100%Verified Answers Latest.
faying surface - Correct Answer-the mating surface of a member that is in contact with
or in close proximity to another member to which it is to be joined.
joint - Correct Answer-the junction of the workpieces that are to be joined
supplementary welding symbols - Correct Answer-____ ___ are used to provide
complementary information to the basic elements of a basic welding symbol
weld symbol - Correct Answer-a symbol that designates each type of weld, it is drawn in
contact with the reference line and graphically represents the the type of weld to be
made
left side - Correct Answer-the vertical line of a weld symbol must always be on the ___
____ in the weld symbol
arrow side - Correct Answer-a weld symbol placed below the reference line of a welding
symbol is the be made on the ___ ___
plate to be bevelled - Correct Answer-for bevel and groove welds, if an arrow has a
break then the arrow is pointing toward the ____
closest - Correct Answer-in a welding symbol with multiple reference line the sequence
of operations start with the line _____ to the the arrow
to be removed - Correct Answer-if an R printed in the rectangle of a backing bar
designation for a welding symbol, the backing bar is _____ after welding
consumable insert - Correct Answer-a ____ ____ is a piece of filler metal placed at the
root of a weld that is completely fused into the root of the joint
square - Correct Answer-the symbol for a consumable insert in a welding symbol is a
____ placed on the opposite side of the reference line from the weld
Gouge to sound metal - Correct Answer-GTSM in the tail of awelding symbol means
____
dotted lines - Correct Answer-the designation of joint to be prepared after assembly of
two members is showed using ___ ___ to draw the weld symbol
, seal weld - Correct Answer-welds intended to provide a water tight seal are have ___
___ printed in the tail of the welding symbol
right - Correct Answer-a fillet welds length is shown to the ___ of the weld symbol
left - Correct Answer-the size of a fillet weld is shown to the ___ of the weld symbol
pitch - Correct Answer-____ is the space between sections of weld on centers of an
intermittent weld
Staggered Intermittent Weld - Correct Answer-offset weld symbols on both sides of the
reference line designates a ___ ___ ___
1.5 to 6.0 mm - Correct Answer-CSA and AWS standards allow GTAW filler metals in
what diameters?
- Correct Answer-Electrode packaging must have what information
GTAW - Correct Answer-porosity, electrode contamination, solidification cracks down
the centerline of the weld bead (especially in craters) and tungsten includes are
common discontinuities of what welding process
Manual metal arc welding - Correct Answer-MMAW stands for
constant current - Correct Answer-what kind of power source has a drooping volt-
ampere curve
AC SMAW - Correct Answer-benifits of using __ ____ are :
-arc blow is rarely a problem
-suitable for welding thick sections with large diameter electrodes
risk of electrocution, limited choice of electrodes - Correct Answer-the cons of us AC
SMAW are ____
120 - Correct Answer-low hydrogen rods should be stored in ovens at _____ degrees
celcius
once - Correct Answer-low hydrogen electrodes can only be rebaked how many times?
230-260 2 hours - Correct Answer-low hydrogen electrodes exposed to ambient
temperatures and humidity should be rebaked at ____ degrees Celsius for _ _____
calcium carbonate - Correct Answer-____ ____ is an important ingredient in low
hydrogen flux because it produces a fast freezing slag
100%Verified Answers Latest.
faying surface - Correct Answer-the mating surface of a member that is in contact with
or in close proximity to another member to which it is to be joined.
joint - Correct Answer-the junction of the workpieces that are to be joined
supplementary welding symbols - Correct Answer-____ ___ are used to provide
complementary information to the basic elements of a basic welding symbol
weld symbol - Correct Answer-a symbol that designates each type of weld, it is drawn in
contact with the reference line and graphically represents the the type of weld to be
made
left side - Correct Answer-the vertical line of a weld symbol must always be on the ___
____ in the weld symbol
arrow side - Correct Answer-a weld symbol placed below the reference line of a welding
symbol is the be made on the ___ ___
plate to be bevelled - Correct Answer-for bevel and groove welds, if an arrow has a
break then the arrow is pointing toward the ____
closest - Correct Answer-in a welding symbol with multiple reference line the sequence
of operations start with the line _____ to the the arrow
to be removed - Correct Answer-if an R printed in the rectangle of a backing bar
designation for a welding symbol, the backing bar is _____ after welding
consumable insert - Correct Answer-a ____ ____ is a piece of filler metal placed at the
root of a weld that is completely fused into the root of the joint
square - Correct Answer-the symbol for a consumable insert in a welding symbol is a
____ placed on the opposite side of the reference line from the weld
Gouge to sound metal - Correct Answer-GTSM in the tail of awelding symbol means
____
dotted lines - Correct Answer-the designation of joint to be prepared after assembly of
two members is showed using ___ ___ to draw the weld symbol
, seal weld - Correct Answer-welds intended to provide a water tight seal are have ___
___ printed in the tail of the welding symbol
right - Correct Answer-a fillet welds length is shown to the ___ of the weld symbol
left - Correct Answer-the size of a fillet weld is shown to the ___ of the weld symbol
pitch - Correct Answer-____ is the space between sections of weld on centers of an
intermittent weld
Staggered Intermittent Weld - Correct Answer-offset weld symbols on both sides of the
reference line designates a ___ ___ ___
1.5 to 6.0 mm - Correct Answer-CSA and AWS standards allow GTAW filler metals in
what diameters?
- Correct Answer-Electrode packaging must have what information
GTAW - Correct Answer-porosity, electrode contamination, solidification cracks down
the centerline of the weld bead (especially in craters) and tungsten includes are
common discontinuities of what welding process
Manual metal arc welding - Correct Answer-MMAW stands for
constant current - Correct Answer-what kind of power source has a drooping volt-
ampere curve
AC SMAW - Correct Answer-benifits of using __ ____ are :
-arc blow is rarely a problem
-suitable for welding thick sections with large diameter electrodes
risk of electrocution, limited choice of electrodes - Correct Answer-the cons of us AC
SMAW are ____
120 - Correct Answer-low hydrogen rods should be stored in ovens at _____ degrees
celcius
once - Correct Answer-low hydrogen electrodes can only be rebaked how many times?
230-260 2 hours - Correct Answer-low hydrogen electrodes exposed to ambient
temperatures and humidity should be rebaked at ____ degrees Celsius for _ _____
calcium carbonate - Correct Answer-____ ____ is an important ingredient in low
hydrogen flux because it produces a fast freezing slag
