Dante Level 2 Exam Questions And Answers (Verified And Updated)

Dante Level 2 Exam Questions And Answers (Verified And Updated) Dante multicast can be managed with IGMP Snooping v2 or v3. - answerTrue When should IGMP snooping (or other multicast management) be considered for a Dante network? - answerWhen the estimated multicast bandwidth may approach a network port's saturation point, impacting performance. If a switch has 10x 1Gbps ports, how much switching capacity would a switch need to be considered "non-blocking"? - answer20Gbps If a multicast packet is sent on an unmanaged network, what will happen? - answerThe multicast packet will propagate to every port on the network - it will behave similarly to broadcast. Match the transmission method with its description - answerUDP: A one-way transmission with no delivery verification. Suitable for LANs where traffic is under your control and interruptions are unlikely. Preferred for real-time networks for lower overhead and lower latency. TCP: A connection with delivery verification. Good for general internet traffic where dropped packets are likely. If you mix switches with and without IGMP filter, what will happen? (Select all that apply) - answerSwitches with IGMP will not forward unrequested Multicast. Switches without IGMP will forward Multicast to all their ports. DSCP values range from 0-63. What is that used for in QoS? - answerWhen configuring the switch, you can determine which DSCP values will lead to which queue. When commissioning or doing maintenance on a system with redundant networks, which is a good practice? - answerConnect one network at a time, and verify that the devices are not set to switched mode. Connect the Dante chipsets with the maximum number of audio channels they support: - answerBroadway (16x16) PCle Card (128x128) Dante AV (1x8) Brooklyn II (64x64)