Infection Control, TDLR Written Final Exam |Question and Answer| UPDATED!!

Infection Control, TDLR Written Final Exam |Question and Answer| UPDATED!! Infection control *Ans* involves the steps you take to prevent the spread of disease and kill certain or all microbes. Sanitation, Disinfection, Sterilization *Ans* the 3 main categories of infection control Sanitation *Ans* to remove dirt and debris to aid in preventing the growth of microbes, clean and reduce microbes on the surface, but do not kill microbes Antiseptics *Ans* arrest or prevent the micro-organisms on the skin Disinfection *Ans* to destroy or kill bacteria and broad spectrum of viruses on nonporous surfaces, such as implements Sterilization *Ans* to destroy or kill all microbres Bloodborne Pathogen Disinfection *Ans* required for all tools and implements that have come in contact with blood or body fluids. Requires the use of EPA-registered disinfectant labeled as effective against HIV & HBV or tuberculocidal. Brush or Comb Disinfection Procedures *Ans* 1. Remove all hair from the brush or comb. 2. Wash the brush or come thoroughly with soap and water to remove any dirt, grease or oil. 3. Rinse the brush or comb thoroughly and pat dry to avoid dilution when immersed in disinfectant. 4. Immerse the brush or comb completely in disinfectant solution. Follow timing instructions from manufacturer. 5. Remove the brush or comb with forceps, tongs or gloved hands. Follow manufacturer's directions for rinsing and drying. 6. Store in a disinfected, dry, covered container or cabinet ( referred to as dry sanitizer ) until needed. Cleaning & Disinfecting of work envoriment *Ans* *prior to using disinfectant, ultrasonic cleaners, which uses high frequency sound waves,can be used 1. Disinfect combs and brushes after each use