SFA 11-14 with Correct Solutions 2024

SFA 11-14 with Correct Solutions 2024 X-ray inspection and Magnafluxing are examples of what type of analytical approach? - Answer - Nondestructive testing Spectroscopy and chromatography are examples of what type of analytical approach? - Answer - Chemical and composition Stress analysis and accelerated aging are examples of what type of analytical approach? - Answer - Mechanical and environmental testing Scanning electron microscopy and photography are examples of what type of analytical approach? - Answer -Optical SIMS and FTIR are examples of what type of analytical approach? - Answer -Chemical and composition You should always trust passing results on dimension inspections in the pedigree analysis. - Answer - False Appendix A is a very good cross-reference for analytical equipment and suspected failure causes. - Answer -True The interferometer is used in an accurate surface-finish gage. - Answer -True Pressurized fluorescent dye testing is destructive to the component undergoing analysis. - Answer -False, non-destructive Fractures in components can be caused by tension, compression, bending, or fatigue. - Answer -True For both optical and electron microscopy, we would like to have a permanent record of the image, so we would use [A] for that. The preferred [B] approach is to use a digital single-lens reflex camera with a tripod and a macro lens. - Answer -photography photographic Hardness testing, load testing, and stress analysis are examples of [A] testing. - Answer -mechanical Repetitive temperature cycling and exposure to humidity or ultraviolet radiation are examples of [A] testing. - Answer -environmental If we suspect failures induced by aging, we might contact commerc