INDIANA FIRE FIGHTER MANDATORY TEST QUESTIONS AND ANSWERS 2024;ACE IN THE INDIANA FF TEST 100% GUARANTEED SUCCESS

INDIANA FIRE FIGHTER MANDATORY TEST QUESTIONS AND ANSWERS 2024;ACE IN THE INDIANA FF TEST 100% GUARANTEED SUCCESS The PASS will activate in what two modes? Ans- Manual & motion-activation What are some contaminates that can get on our PPE? Ans- Carcinogens, Hydrocarbons, Blood-borne pathogens The steel shank in turnout boots offers protection to what part of the foot? Ans- Bottom When should a full inspection of your PPE take place? Ans- After every alarm, After cleaning, Prior to cleaning While doffing______________. Ans- Perform a quick inspection of any component you feel you might have damaged or contaminated The hood is to worn under the SCBA facepiece. Ans- False NFPA ______ covers Structural PPE. Ans- 1971 The three layers of the pants & coat ensemble are the heat-resistant layer, the moister barrier, and the __________. Ans- Thermal liner The drag rescue device (DRD) in the turnout coat is designed for __________________. Ans- Pulling a firefighter to safety on the floor or ground A signal that your gear is superheated is the ____________. Ans- Off-gassing your PPE exhibits When donning PPE _____________________. Ans- Don your hood prior to your coat The drag rescue device (DRD) is suitable to attach a rope system for lowering a fallen firefighter. Ans- False What level of hazmat protection does structural PPE provide? Ans- Level D Which of the following are the three layers of Structural PPE? Ans- Outer Shell, Moisture barrier, Thermal barrier What is the highest level of Hazmat PPE available? Ans- Level A Helmet face shields, or flip-downs, provide what level of eye protection? Ans- Secondary When removing superheated gear, one step is to ____________. Ans- Open your coat as wide as possible and roll the coat and SCBA out and off your shoulders. Most bunker boots are placed in pants for quick and efficient donning. Ans- True Wildland & brush gear is the same as structural PPE. Ans- False When worn correctly, your ________offers the best protection against harm from the forces and elements. Ans- PPE Thermal Protective Performance for Structural PPE measures _____________. Ans- The amount of heat transfer from one layer of the garment to another. What type on gear is designed for use in high angle, trench, or collapse rescue situations? Ans- Technical Rescue PPE NFPA requires all PPE to be formally inspected, cleaned, and repaired, if needed, a minimum of _________ times a year to prevent the buildup of contaminates. Ans- Two Before stowing your PPE ---- whether in locker, bag, or compartment on apparatus ------_____________. Ans- Make sure all components are completely dry The chinstrap must be worn at all times, regardless of how the helmet is fitted to the head. Ans- True When performing pick-head axe maintenance, __________________________. Ans- Do not over sharpen When performing maintenance on bolt cutters, _________________________. Ans- Wipe entire tool with light oil. When performing maintenance on a flat-head axe, __________________. Ans- Remove all paint from the axe head. When using a chain saw to ventilate a roof, you should ________________. Ans- Plunge the saw only a few inches into the material, Bring saw to full RPM's before you plunge into the material, Hold the saw in an almost vertical position. Reciprocating saws are generally used by firefighters for _______________. Ans- Vehicle and machinery extrication. The recommended minimum distance that firefighters should maintain between themselves and another firefighter operating a saw is ___________. Ans- 10 feet The most important safety factor a saw operator must observe after cutting with a rotary saw is ________________. Ans- Stop the blade from rotating. By watching the discharge from the chainsaw, a firefighter can determine the condition of the chain. If a firefighter sees dust when using a chainsaw, it means the chain is __________________. Ans- Dull When using a chain saw ti cut a ventilation hole, a firefighter should use the ____________ of the chain. Ans- Tip A "live saw" means that the saw is _______________. Ans- Running Cutting with an axe is as much _____________ as it is strength. Ans- Hand-eye coordination Spreading your feet will help to ______________. Ans- Center your body weight Allow ______________ to do the work when using an axe. Ans- The weight of the axe When swinging an axe, concentrate on _______________. Ans- Accuracy Cutting, striking, pushing, pulling, and prying are all examples of ___________________? Ans- Various tasks tools can accomplish on the fireground Effectively used tools become ______________ of/to a firefighter's body. Ans- Extensions The primary role of the axe is to ____________________. Ans- Cut A pick-head axe has how many cutting bits? Ans- One The ideal weight for a pick-head axe is ___________________. Ans- 8 pounds Common terms for a ________________ saw are cut-off saw, demolition saw, or rotary saw. Ans- Rotary Portable Ladders should be visually inspected ________________. Ans- Monthly When inspecting portable ladders, check the rungs to ensure that __________________ Ans- None are bent, loose or gouged The hooks on the roof ladders should operate freely and have ends that are ____________________ Ans- Sharp When inspecting a ladder, if there are any sharp edges on a rail, beam, rung or foot, it may be necessary to ___________________________. Ans- File them down Ladders must be marked with their proper numerical _______________. Ans- Length Following the _____________________ is the best way to keep a ladder in service and ready for fire duty. Ans- Manufacturer's recommendations The most common way to secure a ladder is for the firefighter at the base to _______________ the ladder. Ans- Foot Pole ladders are also known as ________________ ladder. Ans- Bangor Commercial floor-to-floor heights are typically _______________. Ans- 10-12 feet Extension ladders move in __________________ increments? Ans- 14-inch The point of the ladder, when lifted where it is balanced evenly is the ________________. Ans- Balance point A section of a ladder that can be extended out of the bed section to gain height and distance is the ______________. Ans- Fly Ladders should be service tested _________________________. Ans- Annually After raising a extension ladder, the firefighter should check that the __________________ is (are) locked before climbing. Ans- Dogs When working on a sloped roof, a(an) _________________ ladder should be used. Ans- Roof Mechanical locking devices located at each end of the beam on the fly section that are spring-loaded and engage on each rung as an extension ladder is raised are called ______________. Ans- Dogs When transporting a ground ladder with two firefighters, one of the most important things to ................................................................................... .........................................................................................