MSF Basic eCourse: Special Riding Situations Questions & 100% Verified Answers | Latest Update | Already Graded A+

Road Surfaces : Motorcycles are designed to travel across a wide variety of road surfaces, but may handle differently on each. Part of being a good rider is understanding and compensating for different road surfaces. Rain-slick surface : Roads are most slick during the first few minutes of rain because oil and dirt mix with the water. It may be best to stop in a safe area and wait out the situation. Reduce speed and minimize lean. Metal covers, bridge gratings, train tracks, painted or taped lines, leaves, and wood can be very slick when wet. When you ride in the rain, use the tire tracks left by cars to help prevent hydroplaning. Hydroplaning occurs when water builds up under the tire contact patch and results in loss of traction. Maintaining proper tire pressure will help keep the grooves in your tread open and able to channel water away for better traction. Worn pavement 2 | P a g e : Ruts can form in areas of heavy traffic. They can make handling your motorcycle difficult and may even cause damage if you hit them hard. Also, rain builds up in these areas and increases the chance of hydroplaning. Avoid these ruts when possible. Loose Surfaces and Debris : Be aware of sand, gravel, rocks, and trash. The same is true for liquids such as fuel, oil or engine coolant. Look out for shiny or damp pavement. Watch for items that might cause tire damage such as nails or sharp metal objects. Use a good lane position, especially in curves, to give yourself time and space to adjust your path of travel. Avoid following vehicles such as trucks or trailers that are hauling debris, as items could come loose and fall into your path. Crack Sealant and Tar Strip