Test Out 2.4.3 Questions and Answers Graded A+

Test Out 2.4.3 Questions and Answers Graded A+ Which Tool Would you use to grab and lift small objects 3-Prong Holder You are an IT technician for your company. One of your employees has a computer that continually reboots when it is powered on. He has asked you to fix it. You suspect that the power supply may be failing. Use a multi-meter to test the power supply. You are removing screws within a computer, but several have fallen into places you can't reach. Which tool would help retrieve the small screws. Extension Magnet Which tool would be the best choice for removing and replacing the motherboard BIOS chip. IC Extractor Which of the following BEST describes the purpose for which loop back plugs are used? Testing ports by returning output signals as input A printer is behaving erratically and you suspect a faulty parallel port. Which tool can you use to test the parallel port? Loopback Plug Which tool would you use to measure electrical properties such as voltage, amps, and resistance? Multi-meter You suspect that the power supply in your desktop PC is failing. You want to use a multimeter to test the power supply. Which multimeter setting should you use? DC Volts A technician is troubleshooting a computer that doesn't start up correctly. Which of the following tools could the technician use to troubleshoot the computer? Known Good Spares / POST Card A maintenance worker accidenly nicks a bundle of network cables routed to multiple wall jacks in a conference room. Only one of the cable's wires are severed. A technician is tasked with replacing the cable. Which tool would the technician MOST likely use to identify which wall jack connects to the severed cable. Tone Generator And Probe Which of the following tools can help prevent damaging when working with computer components? Antistatic Pad and Wrist Strap Which of the following tools is specifically designed to test the DC voltage on a hard disk drive power connector? Power Supply Tester You need to trace the route that a Cat 6 UTP cable takes through the ceiling and walls of your building. Which tool should you use? Tone Generator Your workstation is unable to communicate with any other computer on the network. Which of the following tools should you use to test the ability of the network card to send and receive signals? Loopback Plug