BNSF RCO Test Question and Answer 100% Correct

BNSF RCO Test Question and Answer 100% Correct Control and fuel pump switch - Provides power to the fule pump on the locomotive. This switch should be ON the controlling locomotive. Low lube oil button - detects a loss of lubricating oil pressure and directs governor to shut down the diesel engine Low water buton - located on the left front corner of the diesel engine near the GOVERNOR and is issued to detect a loss of cooling water pressure. If the LOW WATER button will protrude from the GOVERNOR, and the diesel engine will shut down. The GOVERNOR SHUTDOWN light on the control panel will be illuminated and the locomotive will appear to have suffered a low oil malfunction. However, the LOW WATER button will protrude to indicate the true cause of the shutdown. Crankcase Over Pressure Button - Located at the left front corner of the diesel engine near the governor. It monitors the pressure in the diesel engine crankcase. If pressure is detected the device will cause the LOW OIL buton to protrude from the governor and the diesel engine will shut