Neiep 830 questions with complete solutions

Neiep 83012 - correct answer Although typically horizontal in design, the maximum angle of inclination for the moving walk is ______ degrees 115,15 - correct answer A ________ Volt , ______ amp outlet is required by same for both the upper and lower truss True - correct answer True or False Water run off must be separated before the discharge into the public drains 20 - correct answer For drive motors that require over speed protection, it must stop the systems if speed exceeds ______ % of rated speed Torque - correct answer The nameplate on the brake must indicate the ________ setting Drum - correct answer The _______ brake is similar to the brake system found on gearless traction elevators Head end - correct answer The drive end of a belted walkway is called the _______ ________ 3000 - correct answer The tensioning device on the tail end of the belted moving walk is normally set at ______ lbs Crab/circle - correct answer The portion of the track system that guides the pallets around the turns are called the ______ tracks False - correct answer True or false The lip track is used to restrain the step chain roller from up and down movement