Advanced Rigging Test Questions And Answers

Advanced Rigging Test Questions And Answers the operational quadrant between the left-or-right-side outriggers is - ANS over-the-side cranes are typically built to be - ANS longer than they are wide in a multiple-crane lift, the crane with the greatest net capacity must always be - ANS closest to the loads center of gravity leverage is defined as - ANS the power applied to a lever to cause the load to move the quadrant that is located between the rear outriggers or crawlers in the rearward direction of travel is known as - ANS over-the-rear what dynamic occurs when a load is hoisted from a point other than directly over the load - ANS pendulum effect the sudden release of a load that causes a rapid change in effective load weight is called - ANS acceleration backward stability of a crane is affected by - ANS high boom angles and inclines a loads center of gravity in relation to the tipping axis is affected by all of the following except - ANS raising or lowering the load a cranes stability is affected by all of the following except - ANS centered lift to find the parts of line, the operator - ANS divides the suspended weight by the WLL of the hoist rope a document that outlines all weight, rigging, and configuration requirements for a lift is a - ANS lift plan when a bundle of rebar is being lifted with two slings in a choker hitch, the sling eyes should be threaded in the opposite direction to improve load stability - ANS false